ADV7391BCPZ, Video Encoder & Decoder IC 3xDAC RGB, YCbCr2 RGB, YCbCr2 10bit- 3.3 V 32-Pin LFCSP

  • RS-artikelnummer 183-2323
  • Tillv. art.nr ADV7391BCPZ
  • Tillverkare / varumärke Analog Devices
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): TW
Produktdetaljer

The ADV7390/ADV7391/ADV7392/ADV7393 are a family of high speed, digital-to-analog video encoders on single monolithic chips. Three 2.7 V/3.3 V 10-bit video digital-to-analog converters (DACs) provide support for composite (CVBS), S-Video (Y-C), or component (YPrPb/RGB) analog outputs in either standard definition (SD) or high definition (HD) video formats. Optimized for low power operation, occupying a minimal footprint and requiring few external components, these encoders are ideally suited to portable and power sensitive applications requiring TV-out functionality. Cable detection and DAC automatic power-down features ensure that power consumption is kept to a minimum. The ADV7390/ADV7391 have an 8-bit video input port that supports SD video formats over a software defined radio (SDR) interface and HD video formats over a double data rate (DDR) interface. The ADV7392/ADV7393 have a 16-bit video input port that can be configured in a variety of ways. SD RGB input is supported. All members of the family support embedded EAV/SAV timing codes, external video synchronization signals, and the I2C communication protocol

Specifikationer
Attribute Value
Number of DACs 3
Standard Input Type RGB, YCbCr2
Standard Output Type RGB, YCbCr2
ADC/DAC Resolution 10bit
Power Supply Type Single
Typical Operating Supply Voltage 3.3 V
Mounting Type Surface Mount
Package Type LFCSP
Pin Count 32
Dimensions 5.1 x 5.1 x 0.75mm
Height 0.75mm
Length 5.1mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
Width 5.1mm
490 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Tray of 490)
127,621 kr
(exkl. moms)
159,526 kr
(inkl. moms)
Enheter
Per unit
Per Tray*
490 +
127,621 kr
62 534,29 kr
Related Products
The MCP3913 device is a 3V six-channel Analog ...
Description:
The MCP3913 device is a 3V six-channel Analog Front End (AFE, containing six synchronous sampling delta-sigma ADCs, six PGAs, phase delay compensation block, low-drift internal voltage reference, digital offset and gain error calibration registers, and high-speed 20 MHz SPI compatible ...
2-channel, 256-position potentiometersEnd-to-end resistance: 2.5 kΩ, 10 kΩ, ...
Description:
2-channel, 256-position potentiometersEnd-to-end resistance: 2.5 kΩ, 10 kΩ, 50 kΩ, and 100 kΩCompact 10-lead MSOP (3 mm ´ 4.9 mm) packageFast settling time: tS = 5 μs typical on power-upFull read/write of wiper registerPower-on preset to midscaleExtra package address decode ...
64 PositionReplaces Four Potentiometers10 kΩ, 100 kΩPower Shutdown ...
Description:
64 PositionReplaces Four Potentiometers10 kΩ, 100 kΩPower Shutdown - Less than 5 μA3-Wire SPI-Compatible Serial Data Input10 MHz Update Data Loading Rate+2.7 V to +5.5 Single Supply OperationMidscale PresetApplicationsMechanical Potentiometer ReplacementProgrammable Filters, Delays, Time ConstantsVolume Control, ...
Operates from 3V or 5V power suppliesUltra low-power ...
Description:
Operates from 3V or 5V power suppliesUltra low-power consumptionDual digitally controlled, 65-position potentiometersLogarithmic resistance characteristic (1dB per step)Zero crossing eliminates noise caused by discrete wiper changes2-wire addressable control interfaceIndustrial operating temperature range: -40°C ...