SKF Machine Condition Indicator -20°C → +85°C, Dimensions 33.66 (Dia.) x 68.26 mm

  • RS-artikelnummer 818-6947
  • Tillv. CMSS 200-02-SL
  • Tillverkare / varumärke SKF
Legislation and Compliance
Ej tillämpbart
COO (Country of Origin): US


The CMSS 200 is a low-cost machine condition indicator for monitoring non-critical machinery such as gearboxes, pumps, fans, compressors and motors. Programming is done using a magnetic key to set alarm levels, switch between operating modes, set vibration and temperature limits, and acknowledge and reset alarms. By giving an early indication of when a unit is operating outside of its usual parameters, expensive failures and breakdowns are avoided reducing down time and maintenance costs.

The CMS 200 can be set-up in one of four operating modes:

Threshold mode

Velocity and enveloping measurement results are compared to the default alarm threshold levels running at constant speeds from 900 rpm to 3600 rpm.

Percentage Mode

The CMSS 200 records a set of measurements that are used to represent normal working conditions. A multiple of these readings are used to establish the limit of operation and any deviation above these limits triggers an alarm condition.

Verification Mode

If an alarm condition is triggered, the measurement is retaken to confirm removing. With a complex internal algorithm, the measurement helps to prevent false alarms.

Adaptive Alarming

If an alarm condition triggers a small deviation, the CMSS 200 monitors the condition over a period of up to 12 hours before triggering a red alarm. If the set values exceed an excessive amount, then the sensor triggers a red alarm without monitoring.
To maximise battery life, the MCI remains in sleep mode activating up to 8 times in a 24-hour period. The vibration sensor can be pre-set by the technician to record and check data against pre-set levels.

• Three, multiple colour LEDs for easy visual alarm warning
• 10 Hz to 1 kHz
• Stud or glue mounting
• IP 69 K
• 3-year battery life
• Activates Up to 8 times per day to take measurements
• 3.6 V Lithium non-replaceable battery
• Early warning of stage 3 bearing defects (900 rpm to 3600 rpm)
• Durable polymer enclosure with stainless steel base

Machine Condition Indicator

Attribute Value
Width 33.66mm
Depth 68.26mm
Minimum Operating Temperature -20°C
Maximum Operating Temperature +85°C
Dimensions 33.66 (Dia.) x 68.26 mm
3 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) 1 Box of 2
4 305,98 kr
(exkl. moms)
5 382,48 kr
(inkl. moms)
Per Box
Per unit*
1 +
4 305,98 kr
2 152,99 kr
Relaterte Produkter
The acceleration sensors are manufactured on the basis ...
The acceleration sensors are manufactured on the basis of MEMS-based differential capacitors and are equally suitable for measuring acceleration, vibration and inclination. The sensor is characterised by a long service life, minimal drifts and great long-term stability. The special housing ...
The range of shock sensors from Murata are ...
The range of shock sensors from Murata are designed for high performance acceleration sensors for vibration and mechanical shock. They are designed for a wide range of applications including; consumer equipment, healthcare, security, tyre pressure monitoring and industrial automation.
Normally open contact acceleration switches used to detect ...
Normally open contact acceleration switches used to detect sudden changes in velocitySteel gold plated caseChoice of activation levels: 2G (455-3665), 5G (289-7935), 10G (455-3643)Dimensions: Length 18mm (inc. pins) Body Dia. 4.6mm.
Sensor reacts when disturbed by giving a fleeting ...
Sensor reacts when disturbed by giving a fleeting change of state (i.e. N/O to N/C or vice versa). The time taken to settle depends on the amount of energy absorbed by the device, the settled state will be random unless ...