Monitran Vibration Sensor 20 mA -25°C → +90°C, Dimensions 27 x 43 mm

  • RS-artikelnummer 533-2396
  • Tillv. art.nr MTN/1185ICQ-25
  • Tillverkare / varumärke Monitran
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

MTN1185I Series 4-20mA ATEX Approved Accelerometer

ATEX Group I and II approved
Used for IS data collector, oil, mining, etc
4-20mA output for PLC interface
Output proportional to RMS velocity (mm/s)
Available with 0-10mm/s (533-2368) or 0-25mm/s (533-2374) velocity ranges
Frequency from 2 Hz to 1 kHz
Dynamic range: 50 g peak
5 meter armoured PTFE cable
IP 67 Stainless Steel body Case
To use with Glue or M8 Mounting stud
Dimensions (DxL): 27 x 43 mm

Approvals

EEx ia lic BAS02ATEX1057/3

Accelerometers

Vibration sensors use solid-state piezoelectric accelerometers to detect the level of vibration in rotating elements like bearings and gearboxes on machinery such as motors, generators, pumps, fans and compressors. Regular vibration measurements on all critical machines as part of the maintenance regime can detect early signs of failure and provide a way to eliminate these problems. Bearing wear, poor balance and loose mounting all lead to the failure of rotating machinery. Unexpected machinery failure leads to unplanned maintenance costs, loss of production plus potential Health and Safety hazards. They are rugged, adaptable to all types of machinery and conditions including operation in hazardous areas, easy to install and require no maintenance. Used in conjunction with off- and on-line vibration analysers they yield valuable diagnostic information on the machinery's condition and reveal where and when failure may occur allowing pre-emptive maintenance intervention. The dc (velocity) outputs integrate this complex signal into a simple dc signal of 4-20mA proportional to the overall vibration of the machine, ideal for monitoring with all types of industrial controllers.

Specifikationer
Attribute Value
Maximum Current 20 mA
Maximum DC Voltage 32V
Length 43mm
Width 27mm
Depth 27mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +90°C
Hazardous Area Certification ATEX
Dimensions 27 x 43 mm
3 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
3 264,96 kr
(exkl. moms)
4 081,20 kr
(inkl. moms)
Enheter
Per unit
1 +
3 264,96 kr
Related Products
Stainless steel smooth body with PBT sensing face. ...
Description:
Stainless steel smooth body with PBT sensing face. Ideal for applications where contamination may be a problem. LED indication Embeddable IP67 Operating temperature range -25 → +70°C EN60947-5-2 Short circuit and reverse polarity protection.
Celduc PTA/PDC series M10 magnetic proximity sensors are ...
Description:
Celduc PTA/PDC series M10 magnetic proximity sensors are an extremely small package size. Featuring a normally open contact in a stainless steel housing. The PTA/PDC series comes pre cabled with a 2 wire 2 m length cable.
Ifm electronic VTV series vibration transmitters monitor machinery ...
Description:
Ifm electronic VTV series vibration transmitters monitor machinery and equipment according to ISO 10816. The robust design, high IP Rating and high temperature rating are suitable for use in harsh environments. The VTV sensors measure the true RMS velocity of ...
TE Connectivity’s MEAS LDT series of piezo vibration ...
Description:
TE Connectivity’s MEAS LDT series of piezo vibration sensors are constructed with a piezo film element laminated to a polyester layer. A wide range of lead attachments are available. Some of this series are supplied with solder tabs for direct ...