Monitran Vibration Sensor 20 mA -25°C → +90°C, Dimensions 27 x 43 mm

  • RS-artikelnummer 533-2374
  • Tillv. art.nr MTN/1185CQ-25
  • Tillverkare / varumärke Monitran
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

MTN1185 Series 4-20mA Accelerometer

Used for air handling units, building services, fans
4-20mA output for PLC interface
Output proportional to RMS velocity (mm/s)
Available with 0-10mm/s (533-2368) or 0-25mm/s (533-2374) velocity ranges
Frequency from 2 Hz to 1 kHz
Dynamic range: 50 g peak
5 meter armoured PTFE cable
IP 67 Stainless Steel body Case
To use with Glue or M8 Mounting stud
Dimensions (DxL): 27 x 43 mm

Accelerometers

Vibration sensors use solid-state piezoelectric accelerometers to detect the level of vibration in rotating elements like bearings and gearboxes on machinery such as motors, generators, pumps, fans and compressors. Regular vibration measurements on all critical machines as part of the maintenance regime can detect early signs of failure and provide a way to eliminate these problems. Bearing wear, poor balance and loose mounting all lead to the failure of rotating machinery. Unexpected machinery failure leads to unplanned maintenance costs, loss of production plus potential Health and Safety hazards. They are rugged, adaptable to all types of machinery and conditions including operation in hazardous areas, easy to install and require no maintenance. Used in conjunction with off- and on-line vibration analysers they yield valuable diagnostic information on the machinery's condition and reveal where and when failure may occur allowing pre-emptive maintenance intervention. The dc (velocity) outputs integrate this complex signal into a simple dc signal of 4-20mA proportional to the overall vibration of the machine, ideal for monitoring with all types of industrial controllers.

Specifikationer
Attribute Value
Maximum Current 20 mA
Length 27mm
Width 27mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +90°C
Dimensions 27 x 43 mm
Tillfälligt slut i lager – restorder för leverans 2020-06-08
Pris (ex. moms) Each
2 254,15 kr
(exkl. moms)
2 817,69 kr
(inkl. moms)
Enheter
Per unit
1 +
2 254,15 kr
Related Products
Various formats for a wide range of applications. ...
Description:
Various formats for a wide range of applications. IP67 (IP50 E32-L25) All fibres are 2m long black PE. Permissable bend radius 25mm min.Trim to length with the cutting tool supplied for insertion into amplifier clamping aperturesOperating temperature range -40° to ...
The Turck Banner range of Glass Fibre Optics ...
Description:
The Turck Banner range of Glass Fibre Optics are designed to solve challenging sensing applications even in the most hostile environments and can withstand severe shock or vibrations.This range of fibre optics are constructed from a combination of stainless steel, ...
For demanding environments (e.g. machine tool equipment), E2FM ...
Description:
For demanding environments (e.g. machine tool equipment), E2FM Stainless Steel sensors are the perfect choice. Their tough all stainless steel housing and sensing face is highly resistant to impact, abrasion and aggressive chemicals and oils. One piece Stainless Steel housingSensing ...
Fully adjustable low pressure switches suitable for a ...
Description:
Fully adjustable low pressure switches suitable for a wide range of industrial usesNylon 12 housing, neoprene diaphragm, stainless steel spring5 fixing holes on 28.5 pcd for No. 4 self-tapping screws.