Monitran Mounting Adaptor

  • RS-artikelnummer 533-2267
  • Tillv. art.nr MTN/MS001
  • Tillverkare / varumärke Monitran
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

MTN/1010 Low Cost General Purpose

Used for Data-collector, heavy industry, paper machinery
100mV/g +/-10% Nominal at 80Hz
Frequency from 2Hz up to 10KHz
+/-80G Dynamic acceleration range
Voltage bias nominal 12Vdc
TNC Connection
IP 65 Stainless Steel Body Case
Mounting torque: 8Nm
To use with Glue or M8 Mounting stud
Dimensions (D x L): 22x48mm

Approvals

EEx ia lic BAS02ATEX1057/3

Accelerometers

Vibration sensors use solid-state piezoelectric accelerometers to detect the level of vibration in rotating elements like bearings and gearboxes on machinery such as motors, generators, pumps, fans and compressors. Regular vibration measurements on all critical machines as part of the maintenance regime can detect early signs of failure and provide a way to eliminate these problems. Bearing wear, poor balance and loose mounting all lead to the failure of rotating machinery. Unexpected machinery failure leads to unplanned maintenance costs, loss of production plus potential Health and Safety hazards. They are rugged, adaptable to all types of machinery and conditions including operation in hazardous areas, easy to install and require no maintenance. Used in conjunction with off- and on-line vibration analysers they yield valuable diagnostic information on the machinery's condition and reveal where and when failure may occur allowing pre-emptive maintenance intervention. The dc (velocity) outputs integrate this complex signal into a simple dc signal of 4-20mA proportional to the overall vibration of the machine, ideal for monitoring with all types of industrial controllers.

37 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
67,47 kr
(exkl. moms)
84,34 kr
(inkl. moms)
Enheter
Per unit
1 - 9
67,47 kr
10 - 24
66,13 kr
25 +
64,70 kr
Related Products
Our own brand, RS Pro piezoceramic bi-morph element ...
Description:
Our own brand, RS Pro piezoceramic bi-morph element is a versatile, low power electromechanical transducer that is capable of converting mechanical or acoustic energy into electrical energy. When the element is stressed or subjected to vibration, the minute movement causes ...
Ifm electronic VTV series vibration transmitters monitor machinery ...
Description:
Ifm electronic VTV series vibration transmitters monitor machinery and equipment according to ISO 10816. The robust design, high IP Rating and high temperature rating are suitable for use in harsh environments. The VTV sensors measure the true RMS velocity of ...
Normally open contact acceleration switches used to detect ...
Description:
Normally open contact acceleration switches used to detect sudden changes in velocitySteel gold plated caseChoice of activation levels: 2G (455-3665), 5G (289-7935), 10G (455-3643)Dimensions: Length 18mm (inc. pins) Body Dia. 4.6mm.
Plastic cased sensors suitable for low-power use such ...
Description:
Plastic cased sensors suitable for low-power use such as alarms and non-hazardous applications. Gold plated ball and gold plated terminals for improved life and stabilityNon position sensitive, Omni-Directional.