Schneider Electric Valve Actuator, 24 V ac

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): SE
Produktdetaljer

Schneider / TAC Forta M800 Valve Actuator

M800 is an electro-mechanical actuator for the control of two-way and three-way plug valves in:

Domestic hot water systems
Heating systems
Air handling systems

M800 is either controlled by an increase/decrease signal or by a modulating 2–10 V control signal. Modulating control makes for a faster positioning of the actuator.

The electronic circuitry of the actuator ensures that the running time is the same, regardless of the stroke of the valve in question. It is easy to mount and connect the actuator. It can be
mounted directly onto TAC’s control valves, without any mounting kit.

The working range of the actuator is adjusted automatically depending on the stroke of the valve. The electronic circuitry of the actuator then takes care of the adjustment of the valve end positions.

The actuator is supplied by 24 V AC. It can provide 16 V DC voltage supply for older TAC/Schneider controllers.

Valve Actuators - Schneider Electric

Specifikationer
Attribute Value
Supply Voltage 24 V ac
2 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
5 732,98 kr
(exkl. moms)
7 166,22 kr
(inkl. moms)
Enheter
Per unit
1 +
5 732,98 kr
Relaterte Produkter
Maintenance-free, low power consumption, rotary damper/louvre actuators, compatible ...
Description:
Maintenance-free, low power consumption, rotary damper/louvre actuators, compatible with all leading makes of HVAC controls. Minimum life of 60000 operationsStall torque technology requires no end switchesAdjustable U-clamp accepts round or square shaftsVisible position indicatorPushbutton manual overrideDirection ...
A range of electrically operated ball valves using ...
Description:
A range of electrically operated ball valves using George Fischer’s Type 546 ball valve and EA11 electric actuator. Fitted with an emergency manual override, sturdy flame retardant body and thoroughly tested through 150,000 cycles the EA11 and 546 ball valve ...
A pneumatically operated ball valve based on George ...
Description:
A pneumatically operated ball valve based on George Fischer’s 546 range of ball valves and the PA11 pneumatic actuator. Engineered to provide a highly reliable and versatile solution for applications which require a modular unit for specialist applications. Fail safe ...
More and more automation is required at all ...
Description:
More and more automation is required at all levels in our society and the S.64 range is the answer to all our needs for reliable actuated ball valves. It features special seat design to automatically compensate for wear and it ...