2N6073BG 4A, 400V, TRIAC, Gate Trigger 2.5V 20mA, 3-pin, Through Hole, TO-225 Littelfuse

  • RS-artikelnummer 177-5199
  • Tillv. art.nr 2N6073BG
  • Tillverkare / varumärke Littelfuse
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

TRIAC, ON Semiconductor

TRIACs

A range of TRIACs (Triodes for Alternating Current is also known as Bidirectional Thyristors). They are used in AC switching and control applications with current ratings from under 1A to 40A rms. A TRIAC makes a convenient switch for alternating current circuit.

Specifikationer
Attribute Value
Rated Average On-State Current 4A
Mounting Type Through Hole
Package Type TO-225
Maximum Gate Trigger Current 20mA
Repetitive Peak Reverse Voltage 400V
Surge Current Rating 30A
Pin Count 3
Maximum Gate Trigger Voltage 2.5V
Repetitive Peak Forward Blocking Voltage 400V
Maximum Holding Current 30mA
Dimensions 7.74 x 2.66 x 11.04mm
Length 7.74mm
Width 2.66mm
Height 11.04mm
Peak On-State Voltage 2V
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +110 °C
Repetitive Peak Off-State Current 2mA
1000 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Box of 500)
2,592 kr
(exkl. moms)
3,24 kr
(inkl. moms)
Enheter
Per unit
Per Box*
500 +
2,592 kr
1 296,00 kr
Related Products
Versatile and high-efficiency Standard Recovery Power Diodes in ...
Description:
Versatile and high-efficiency Standard Recovery Power Diodes in industry-standard package styles.
The DMFC12 is a single phase or phase-to-phase ...
Description:
The DMFC12 is a single phase or phase-to-phase trigger module with the option of Phase Angle or Burst Fire Control, or a combination of the two i.e. start up in phase angle and then continue in burst firing. Standard Din ...
A range of High Commutation three-quadrant TRIACs from ...
Description:
A range of High Commutation three-quadrant TRIACs from Fagor. These devices are ideally suited to motor and inductive load applications where high commutation rates are encountered. In many areas they may remove the need to include snubber circuits.
The ACS™ Series are static-switch semiconductors for Alternating ...
Description:
The ACS™ Series are static-switch semiconductors for Alternating Current (AC). They are simple-to-drive, sensitive-gate devices with highly inductive load switch-off capability. They are over-voltage protected.