TE Connectivity DPDT Toggle Switch, On-(On), PCB

  • RS-artikelnummer 710-9808
  • Tillv. art.nr 3-1825138-7
  • Tillverkare / varumärke TE Connectivity
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

Toggle Switches - Gemini A Series

Break before make contact timing
Epoxy sealed terminals
Stainless steel frame with brass tin plated solder support

Specifikationer
Attribute Value
Contact Configuration DPDT
Switch Operation On-(On)
Contact Current Rating 5 A @ 28 V dc
Mounting Type PCB
Terminal Type Through Hole
Panel Cut Out Diameter 6.35mm
Actuator Length 10.41mm
Actuator Material Phenolic
Contact Resistance 10mΩ
Operating Temperature Range -30 → +85°C
Panel Cut Out Size 6.35mm
Maximum Operating Temperature +85°C
Minimum Operating Temperature -30°C
Contact Material Silver Plated Copper
Tillfälligt slut i lager – restorder för leverans 2021-01-21
Pris (ex. moms) Each
62,54 kr
(exkl. moms)
78,18 kr
(inkl. moms)
Enheter
Per unit
1 - 24
62,54 kr
25 - 49
51,54 kr
50 - 99
43,27 kr
100 - 249
37,89 kr
250 +
34,91 kr
Förpackningsalternativ:
Related Products
Epoxy sealed terminals prevent contamination during solderingChrome Plated ...
Description:
Epoxy sealed terminals prevent contamination during solderingChrome Plated Brass actuatorDiallyl Phthalate (DAP) case (UL94V-0)Silver contacts.
Vertical and two types of right angle terminations ...
Description:
Vertical and two types of right angle terminations availableSuitable for low level switching applicationsTotally sealed, suitable for immersion cleaningWave solderable, will withstand 260°C for 5 secondsGold plated brass terminalsBrass actuator and PBT caseMinimum load current: 10mA at 50mV - 10μA ...
Switches suitable for PCB mounting with pins arranged ...
Description:
Switches suitable for PCB mounting with pins arranged on a 0.1 in pitch gridRight angle versions have two additional support pinsIdeal where either panel space or board size is at a premiumSuitable for low level switching applicationsTerminals epoxy sealed against ...
Meets IP67 requirementsStainless steel frame with brass tin ...
Description:
Meets IP67 requirementsStainless steel frame with brass tin plated solder supportBreak before make contact timingEpoxy sealed terminal.