- RS-artikelnummer:
- 448-0753
- Tillverkare / varumärke:
- RS PRO
- RS-artikelnummer:
- 448-0753
- Tillverkare / varumärke:
- RS PRO
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
RS PRO SPDT Toggle Switch, On-Off-On, Panel Mount
This RS PRO miniature toggle switch with an On-Off-On configuration can be used for opening and closing electrical circuits, and panel mounted if desired. These kinds of switches are often used on printed circuit boards (PCBs). The single pole double throw (SPDT) switch is latching, so it's held in place without needing constant compression. It features movable, silver-plated brass contacts and a brass actuator. Housed in stainless steel, it has a diallyl phthalate case.
You can safely use this toggle switch in temperatures ranging from -30°C to +85°C. Its ON-OFF-ON configuration means that it has a third switching position in the centre which is off.
This component is Underwriters Laboratories (UL) recognised in Canada and the United States, so it's a safe device. Note that toggle switches are differentiated by contact resistance, contact current rating and/or voltage rating, so you can choose the correct model for your application.
You can safely use this toggle switch in temperatures ranging from -30°C to +85°C. Its ON-OFF-ON configuration means that it has a third switching position in the centre which is off.
This component is Underwriters Laboratories (UL) recognised in Canada and the United States, so it's a safe device. Note that toggle switches are differentiated by contact resistance, contact current rating and/or voltage rating, so you can choose the correct model for your application.
Features and Benefits
Latching toggle switch
Chromium-plated brass actuator
Contact current rating of 5 A @ 28 V DC
Silver-plated brass contact material
Contacts are movable
Panel cut out size of 6.35 mm
Operating temperature range of -30°C to +85°C
Contact current rating of 5 A @ 125 V AC and 5 A @ 28 V DC
Panel mount
Actuator length of 10.41 mm
Panel cut out diameter of 6.35 mm
SPDT contact configuration
Contact resistance of 10 mΩ
Solder type terminal
UL listed
RoHS (Restriction of Hazardous Substances) compliant
Chromium-plated brass actuator
Contact current rating of 5 A @ 28 V DC
Silver-plated brass contact material
Contacts are movable
Panel cut out size of 6.35 mm
Operating temperature range of -30°C to +85°C
Contact current rating of 5 A @ 125 V AC and 5 A @ 28 V DC
Panel mount
Actuator length of 10.41 mm
Panel cut out diameter of 6.35 mm
SPDT contact configuration
Contact resistance of 10 mΩ
Solder type terminal
UL listed
RoHS (Restriction of Hazardous Substances) compliant
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Approvals
UL; cUL recognised
Specifikationer
Attribute | Value |
---|---|
Contact Configuration | SPDT |
Switch Operation | On-Off-On |
Contact Current Rating | 5 A @ 28 V dc |
Mounting Type | Panel Mount |
Terminal Type | Solder |
Panel Cut Out Diameter | 6.35mm |
Actuator Length | 10.41mm |
Actuator Material | Brass |
Contact Resistance | 0.01Ω |
Panel Cut Out Size | 6.35mm |
Contact Material | Silver Plated Brass |
Maximum Operating Temperature | +85°C |
Minimum Operating Temperature | -30°C |
Standards Met | UL Listed |
Operating Temperature Range | -30 → +85°C |