Steel Toggle Latch,Spring Loaded, 80kgf Op.Tension, 43 x 38 x 15mm

  • RS-artikelnummer 264-5150
  • Tillv. art.nr 40064 ZB
  • Tillverkare / varumärke Savigny
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): FR
Produktdetaljer

Turn Latch

This low profile latch is operated by lifting and turning the ’butterfly’ thumbscrew, which operates a cam, pulling down the link
The latch can be used with the catch plate supplied, or can grip directly into a groove
The thumbscrew is spring loaded to ensure that it always lies flat
M4 Fixing
80kgf operating tension
Latch to catch distance 32.7mm

//media.rs-online.com/t_line/L264515-01.gif
//media.rs-online.com/t_line/LF264515-10.gif
Specifikationer
Attribute Value
Material Steel
Spring Loaded Yes
Operating Tension 80kgf
Dimensions 43 x 38 x 15mm
Depth 15mm
Length 43mm
Width 38mm
22 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Pack of 2)
102,625 kr
(exkl. moms)
128,281 kr
(inkl. moms)
Enheter
Per unit
Per Pack*
2 - 8
102,625 kr
205,25 kr
10 - 18
97,49 kr
194,98 kr
20 - 58
92,355 kr
184,71 kr
60 +
86,20 kr
172,40 kr
Related Products
Spring loaded, over-centre latches, made from corrosion resistant ...
Description:
Spring loaded, over-centre latches, made from corrosion resistant materialsCatch snaps into frame, pull to open, with a choice of two pull forcesFits frame from 1.1 to 2.9mm thickHousing ABS polycarbonate, keeper mineral filled nylon.
Five grip length latches all with 8mm 'Take ...
Description:
Five grip length latches all with 8mm 'Take Up' to accommodate different latching length requirementsThe stepped cam provides considerable leverage to fully compress and seal gasketsUse key stock no. 341-0236 (available separately)Chrome plated insert and housing, zinc and passivated steel ...
Short grip (RS 278-427) or long grip (RS ...
Description:
Short grip (RS 278-427) or long grip (RS 278-433) available, to project into a cabinet less than 25mm.The short grip pawl curves toward the panel, long grip curves awayKnurled head versions are zinc plated; the Slotted head latches are zinc ...
Two miniature versions with a curved 1.5mm diameter ...
Description:
Two miniature versions with a curved 1.5mm diameter wire link which allows wider tolerance of fitting dimensions. Normal latch to catch fixing centre is 31.1mm, giving a 15kgf operating tensionSuitable for screw fixing using M3 screws, or weldingNatural finish.