United Automation, DMFC12 415VAC, Thyristor Trigger Module, 24V ac, 4 → 400Hz, 11-Pin, 122 x 70 x 56mm

  • RS-artikelnummer 669-6039
  • Tillv. art.nr DMFC12 415VAC
  • Tillverkare / varumärke United Automation
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): GB
Produktdetaljer

Dual Mode Firing Circuit, DMFC12

The DMFC12 is a single phase or phase-to-phase trigger module with the option of Phase Angle or Burst Fire Control, or a combination of the two i.e. start up in phase angle and then continue in burst firing.

Standard Din Rail mount
Phase Angle and Burst Fire Control, or Combination of both
Soft-Start 0-30 seconds adjustable
Current limit (using external CT/Hall-effect device)
Enable input (volt-free)
0-5V/0-10V, 0-20mA/4-20mA or potentiometer input signal
24Vdc or 18-24Vac supply
Output power span and zero adjustment

The number of complete mains cycles during fixed repeating periods (typically 1 to 10 seconds) is varied, thus altering the duty cycle or on-/off-time ratio. Trigger pulses coincide with the zero-crossing times of the mains supply thus ensuring no RFI is produced when using resistive loads.

Specifikationer
Attribute Value
Input Voltage DC 24V dc
Input Voltage AC 24V ac
Mounting Type DIN Rail
Pin Count 11
Dimensions 122 x 70 x 56mm
Length 122mm
Height 56mm
Maximum Input Logic Voltage 8V
Width 70mm
Maximum Operating Frequency 400 Hz
Maximum Operating Temperature +70 °C
Minimum Operating Frequency 4Hz
Tillfälligt slut i lager – restorder för leverans 2020-04-07
Pris (ex. moms) Each
793,60 kr
(exkl. moms)
992,00 kr
(inkl. moms)
Enheter
Per unit
1 - 1
793,60 kr
2 - 4
695,99 kr
5 - 9
633,01 kr
10 - 19
589,69 kr
20 +
586,48 kr
Related Products
The center tap Schottky rectifier module has been ...
Description:
The center tap Schottky rectifier module has been optimized for ultra low forward voltage drop specifically for the O Ring of parallel power supplies. The proprietary barrier technology allows for reliable operation up to 125 °C junction temperature. Typical applications ...
Variable, manually controlled, phase angle regulator for use ...
Description:
Variable, manually controlled, phase angle regulator for use with direct or transformer coupled, single phase loads. Mounted on integral heat sinkReversible base allows surface/panel mountingLarge Triac handles high inrush currentsSuitable for use with conventional heaters, quartz or tungsten lamps.
Excellent uni-directional switches for phase control applications such ...
Description:
Excellent uni-directional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with microamperes of current. Standard phase control SCRs are triggered with few milliamperes of current at less than 1.5V potential. ...
Excellent uni-directional switches for phase control applications such ...
Description:
Excellent uni-directional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with microamperes of current. Standard phase control SCRs are triggered with few milliamperes of current at less than 1.5V potential. ...