Thermal Interface Pad, TIM, 58 x 58mm 0.16mm, Self-Adhesive

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

ILS Thermal Interface Materials (TIM) - LED Squares

The ILA-TIM-SQUARE series, from Intelligent LED Solutions, are a family of thermal heat pads designed specifically for LED squares (58x58mm). They are available in non-adhesive or single/double sided adhesive options.

"Features of the ILA-TIM-SQUARE single-sided and non-adhesive:
Colour: pewter
0.13mm thick
Temperature range: -240°C to +300°C

Features of the ILA-TIM-SQUARE double-sided:
Colour: cream
0.16mm thick
Temperature range: -240°C to +300°C"

Thermal Interface Materials, Intelligent LED Solutions

The ILA-TIM-XXXX-YY series of high-performance, cost effective thermal Interface Material (TIM), from Intelligent LED Solutions, is designed for use with their standard LED array products (such as: 773-3482). The Thermal Interface material fills air pockets between the PCB and the heat sink surfaces, forming a continuous layer to improve the transfer of heat away from the LED.
Intelligent LED Solutions offers three versions of Thermal Interface Material: Double sided adhesive (suffix -2A), single sided adhesive (suffix -1A) and no adhesive (suffix -0A).

Specifikationer
Attribute Value
Dimensions 58 x 58mm
Thickness 0.16mm
Length 58mm
Width 58mm
Material TIM
Self-Adhesive Yes
Hardness Shore A 90
Denna produkt har utgått
Related Products
Phase change thermal Interface material with aluminium carrier ...
Description:
Phase change thermal Interface material with aluminium carrier intended for use between a computer processor and a heat sink.,Adhesive on one side,Requires pressure of assembly to cause flow.,Applications: ,Computer and peripherals,Power conversion,High performance computer processor,Power semiconductors ,Power ...
These combine the thermal transfer properties of the ...
Description:
These combine the thermal transfer properties of the Sil-Pad rubber with the high dielectric strength and excellent physical resistance of Kapton MT film.Electrical insulators and thermal conductors.Durable insulators.Resistant to high voltages and do not require thermal grease to provide heat ...
With hole except model SL018AL20, which is designed ...
Description:
With hole except model SL018AL20, which is designed for clip mounting and not screw mounting.Harder than all metal alloys, aluminium ceramic is an exceptional material allowing extraordinary performance in a very wide field of applications.Electrical insulators and thermal conductors.High resistance ...
Q-Pad Q2 insulators are made up of a ...
Description:
Q-Pad Q2 insulators are made up of a 25 μm aluminium sheet, coated on both sides with a 65 μm thermo-conductive layer.Thermal conductors.They overcome problems associated with grease, including contamination of fusion welds and cleaning operations.Available in dry or self-adhesive ...