Sensirion SHT21, Temperature & Humidity Sensor -40 → +125 °C ±0.3 °C, ±2 %RH Serial-I2C, 6-Pin DFN

  • RS-artikelnummer 786-5554
  • Tillv. art.nr SHT21
  • Tillverkare / varumärke Sensirion
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): CH
Produktdetaljer

SHT2x Digital Humidity & Temperature Sensors

The Sensirion SHT2x series of DFN digital humidity & temperature sensors are CMOSens® based. They are an industry standard, widely used humidity and temperature sensor. Humidity is measured using a capacitive sensor while temperature is measured using a band-gap sensor.
The SHT2x sensors also contain a version 4 silicon chip with an amplifier, A/D converter, OTP memory and a digital interface. They come in a plastic package which leaves the sensor area open, protecting the devices from external impact and providing long-term stability.
SHT2x sensors are ideal for both high and low volume applications.
The SHT21P has a PWM output and the SHT21S has a PDM output; these can be converted into analogue outputs by the use of suitable low-pass filters.
SHT20 - Low cost, SHT21 - Standard, SHT25 - High Accuracy

CMOSens® based technology
Fully calibrated
I²C serial interface (Not SHT21P/SHT21S)
Digital output
Low power consumption
Long-term stability
Supply voltage range: 2.1 to 3.6 V

The following sensors are available:

123-7351 · SHT20 · I²C Digital output
786-5554 · SHT21 · I²C Digital output
876-5055 · SHT21P · PWM output
876-5064 · SHT21S · PDM output
727-6226 · SHT25 · I²C Digital output

Temperature & Humidity Sensors, Sensirion

Specifikationer
Attribute Value
Sensor Function Temperature & Humidity
Output Type Digital
Interface Type Serial-I2C
Accuracy ±0.3 °C, ±2 %RH
Mounting Type Surface Mount
Pin Count 6
Minimum Operating Temperature -40 °C
Operating Temperature Range -40 → +125 °C
Maximum Operating Temperature +125 °C
Minimum Operating Supply Voltage 2.1 V
Maximum Operating Supply Voltage 3.6 V
Package Type DFN
Length 3mm
Height 1.1mm
Width 3mm
Resolution 8 → 14 bit
Dimensions 3 x 3 x 1.1mm
35 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
59,14 kr
(exkl. moms)
73,92 kr
(inkl. moms)
Enheter
Per unit
1 - 24
59,14 kr
25 - 49
45,60 kr
50 - 199
40,02 kr
200 - 399
34,43 kr
400 +
32,78 kr
Förpackningsalternativ:
Related Products
High-accuracy digital temperature sensors from Sensirion featuring increased ...
Description:
High-accuracy digital temperature sensors from Sensirion featuring increased intelligence, reliability and improved accuracy specifications in comparison to their predecessors. Functionality includes enhanced signal processing, two user selectable I2C addresses and communication speeds of up to 1 MHz.123-7354 · ...
The HTU21D(F) is a digital humidity sensor with ...
Description:
The HTU21D(F) is a digital humidity sensor with temperature output by MEAS. Setting new standards in terms of size and intelligence, it is embedded in a reflow solderable Dual Flat No leads (DFN) package with a small 3 x 3 ...
The HIH-4000 series has been specifically designed for ...
Description:
The HIH-4000 series has been specifically designed for use in high volume OEM (Original Equipment Manufacturer) applications. These sensors utilise a near linear voltage output making direct input to a controller or other devices possible. They are ideally suited for ...
The SF1 White Filter Cap has been designed ...
Description:
The SF1 White Filter Cap has been designed to protect the SHT1x series of digital humidity & temperature sensors from particle contamination, dust, water immersion and consequent condensation when being mounted. Composed of polypropylene and a filter membrane, the filter ...