Megger TDR1000/3P TDR Cable Fault Locator, 5000m

  • RS-artikelnummer 764-2828
  • Tillv. art.nr 1001-789
  • Tillverkare / varumärke Megger
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): GB
Produktdetaljer

Megger TDR 1000/3P

The TDR1000/3P is a hand held, compact Time Domain Reflectometer for locating faults on metallic cables. It has a minimum resolution of 0.1 m/0.3 ft and a 5 km/15 kft maximum range depending on velocity factor selected and cable type.
Four output impedances are available (25, 50, 75, and 100 Ω) and a velocity factor between 0.2 and 0.99 will meet any cable test requirements. The TDR1000 has a simple selection option which together with a 4 way control switch offers an intuitive operation for the user.

An AUTO selection option ensures that the most effective parameters are selected depending on the range required, aiding rapid diagnosis of the TDR trace. Dual cursors allow complete flexibility, giving the operator full control and instant indication of distance between two points. A trace HOLD feature also allows comparison between conditions, something not seen on most other handheld TDRs. Extra high resolution together with white-light backlight and grey scale tones give the graphical display a vibrancy, aiding the user in identifying key events on the trace.

The TDR1000/3P is supplied with a fused test lead set (764-2831) ready to test CAT IV power circuits. A miniature clip test lead set to test telecom circuits is available separately (please see RS 764-2822)

Dual cursors providing instant indication of distance between two points
AUTO set up for instant use
Ultra fast pulse for near end fault identification
Trace HOLD feature to allow comparison between cables
IP54 rating offers real life working
Designed for use on all metallic cable pairs
Backlit graphics monochrome LCD (256 x 128)
Adjustable display contrast
Resolution to 0.1 m
For use on Telecom TNV-3 circuit, or 150V CAT IV power circuits
Power blocking filter not required
Environmental protection to IP54
Auto selected output impedance (between 25, 50, 75 and 100 Ω)
2 ns pulse for near end fault location
AUTO option selecting gain and pulse for each range
Display distance in metres or feet
Uses five AA (LR6) primary cells (supplied)

Supplied with

5 x AA batteries, Hard carry case, fused test lead set, User guide CD

Specifikationer
Attribute Value
Maximum Range 5000m
Resolution 1 %
Cable Type Metallic Cable Pair
Maximum Pulse Width 2ns
Minimum Pulse Width 4000ns
Pulse Amplitude 5V Pk-Pk
Output Impedance 25 Ω, 50 Ω, 75 Ω, 100 Ω
Velocity Factor/Propagation Velocity 0.99
Battery Life 14 h
Battery Type AA
Display Type LCD
Power Source Battery
Width 48mm
Minimum Operating Temperature -15°C
Dimensions 115 x 48 x 230mm
Maximum Operating Temperature +50°C
Length 115mm
Height 230mm
Weight 600g
Model Number p TDR1000/3P
4 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
12 513,00 kr
(exkl. moms)
15 641,25 kr
(inkl. moms)
Enheter
Per unit
1 +
12 513,00 kr
Relaterte Produkter
Locate cable and wire ground faults, sheath faults ...
Description:
Locate cable and wire ground faults, sheath faults or pipeline coating defects, where the utility is in direct contact with the groundThe intuitive transmitter automatically chooses the correct locating function based on the connected accessory and includes selectable 8/33 kHz ...
FOS-SFP-PM Fiber OneShot PRO Single Mode fibre Distance ...
Description:
FOS-SFP-PM Fiber OneShot PRO Single Mode fibre Distance and Fault Locator measures length and identifies high loss events on single mode fibre optic cable. Like an OTDR, a laser sends light pulses through the fibre and measures the power and ...
Terminal adaptor kit for TDR2000/3 Cable Fault Locator. ...
Description:
Terminal adaptor kit for TDR2000/3 Cable Fault Locator.
AC-DC Charger for TDR2000/3 Cable Fault Locator. ...
Description:
AC-DC Charger for TDR2000/3 Cable Fault Locator.