NXP TDA8029HL/C207,151, TTL System On Chip SOC for Card Reader, 2.7 → 6 V 32-Pin LQFP

  • RS-artikelnummer 124-2430
  • Tillv. art.nr TDA8029HL/C207,151
  • Tillverkare / varumärke NXP
Lagstiftning och ursprungsland
COO (Country of Origin): TW

TDA8029 Low Power Single Card Reader

The TDA8029 series, from NXP, consists of complete one chip, low power, low cost, robust smart card readers. Its different power reduction modes and its wide supply voltage range allow its use in portable equipment. Due to specific versatile hardware, a small embedded software program allows the control of most cards available in the market. The control from the host may be done through a standard serial interface. The TDA8029 smart card reader has a 80C51 core with 16 kB ROM, 256 byte RAM and 512 byte XRAM. Suitable applications for the TDA8029 series include portable card readers, general purpose card readers and EMV compliant card readers. NXP’s software library also allows for easy integration.

Specific ISO7816 UART, accessible with MOVX instructions for automatic convention processing, variable baud rate, error management at character level for T = 0 and T = 1 protocols, extra guard time, etc.
Specific versatile 24-bit Elementary Time Unit (ETU) counter for timing processing during Answer To Reset (ATR) and for T = 1 protocol
VCC generation with controlled rise and fall times
Card clock generation up to 20 MHz with three times synchronous frequency doubling (fXTAL, 1⁄2fXTAL, 1⁄4fXTAL and 1⁄8fXTAL)
Card clock stop HIGH or LOW or 1.25 MHz from an integrated oscillator for card power reduction modes
Automatic activation and deactivation sequences through an independent sequencer
1 to 8 characters FIFO in reception mode
Parity error counter in reception mode and in transmission mode with automatic retransmission
Versatile 24-bit time-out counter for ATR and waiting times processing
Specific ETU counter for Block Guard Time (BGT) (22 ETU in T = 1 and 16 ETU in T = 0)
Supports synchronous cards which do not use C4/C8
Current limitations on card contacts
Supply supervisor for power-on/off reset and spikes killing
DC-to-DC converter (supply voltage from 2.7 to 6 V), doubler, tripler or follower according to VCC and VDD
Shut-down input for very low power consumption
Enhanced ESD protection on card contacts (6 kV minimum)
Communication with the host through a standard full duplex serial link at programmable baud rates
One external interrupt input and four general purpose I/Os.


NXP is a trademark of NXP B.V.

Attribute Value
Processing Unit Microcontroller
Application Card Reader
Technology TTL
Mounting Type Surface Mount
Package Type LQFP
Pin Count 32
Dimensions 7.1 x 7.1 x 1.45mm
Height 1.45mm
Length 7.1mm
Maximum Operating Supply Voltage 6 V
Maximum Operating Temperature +90 °C
Minimum Operating Supply Voltage 2.7 V
Minimum Operating Temperature -40 °C
Width 7.1mm
2250 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Tray of 250)
38,521 kr
(exkl. moms)
48,151 kr
(inkl. moms)
Per unit
Per Tray*
250 - 2250
38,521 kr
9 630,25 kr
2500 - 4750
33,713 kr
8 428,25 kr
5000 +
29,971 kr
7 492,75 kr
Relaterte Produkter
The Infineon C166 microcontroller family are ideally suited ...
The Infineon C166 microcontroller family are ideally suited to automotive, industrial, mass storage and wired or wireless communications applications. These microcontrollers offer better real time control performance than even 32bit, RISC processors. As a 16bit device it also offers a ...
High-speed pipelined 8051-compatible microcontroller core (up to 25 ...
High-speed pipelined 8051-compatible microcontroller core (up to 25 MIPS)2 to 16 kB of on-chip Flash memory256 to 512 bytes of on-chip RAMsingle or multi channel ADCIntegrated 24.5 MHz internal oscillatorSMBus/I2C, UART and SPI serial interfaces3 or 4 16-bit timers.
The FT90x series of 32-bit RISC-core microcontrollers provides ...
The FT90x series of 32-bit RISC-core microcontrollers provides an extensive range of connectivity options, making it the ideal choice for advanced technology 'bridging' applications. Programs execute in zero wait-state RAM yielding 310DMIPS performance from a 100MHz clock. On power-up, program ...
The Z80 CPUs are fourth-generation enhanced microprocessors with ...
The Z80 CPUs are fourth-generation enhanced microprocessors with exceptional computational power. They offer higher system throughput and more efficient memory utilization than comparable second- and third generation microprocessors. The speed offerings from 6 -20 MHz suit a wide range of ...