Grommet for use with UTG Series

  • RS-artikelnummer 220-7089
  • Tillv. art.nr UTG 20AC
  • Tillverkare / varumärke Souriau
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

Cable Clamp with Strain Relief

Souriau Trim Trio Metalok & Shielded Bantams

Flammability rating UL94V0
2 VDE 0110 Group C versions 3 and 7 ways
Moulded keyways ensure error free mating
Standard shell sizes and contact arrangements
High conductive copper alloy
Gold flash or tin plate options
Incorporating stainless steel spring for contact retention
Gold flash or tin plate options

Trim Trio Metalok Bantam Plastic circular connectors, derived from MIL-C-26482, with a secure metal coupling system to provide the complete solution for lightweight, robust industrial interconnections. Shell material is glass filled thermoplastic, with a rated operating temperature of -55°C to +125°C. Contacts to be ordered separately see typically stock no. 437-3712
Plastic connectors, nickel plated to outer body and bayonet ring to satisfy EMC requirements. Cable mounting shells are supplied with metal PG tube, containing twin ferrule system for 360° cable shield continuity. The 2 shells are polarised and locked together by a bayonet action metal ring.
The COM8-1 tool 266-6860, provides an 8 point impression crimp assuring maximum tensile strength on wire sizes up to 2.5mm². The cycle controlled, precision ratchet assures consistent and accurate crimping over many operations.

Note

Panel mounting plug shells with pin inserts will only mate with cable-mounting shells with socket inserts and panel mounting shells with socket inserts will only mate with cable-mounting plug shells with pin inserts. Contacts must be ordered separately.

Specifikationer
Attribute Value
Accessory Type Grommet
For Use With UTG Series
704 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
53,72 kr
(exkl. moms)
67,15 kr
(inkl. moms)
Enheter
Per unit
1 - 14
53,72 kr
15 - 49
52,69 kr
50 - 99
51,55 kr
100 - 249
50,63 kr
250 +
48,07 kr
Related Products
A range of strain relief clamps suited for ...
Description:
A range of strain relief clamps suited for the HR22 series of circular cable connectors, these cable clamps feature an threaded cable clamp and an internal rubber grommet and metal washer for improved environmental protection and support.
3.3mm pitch DF33 retainer clips for use with ...
Description:
3.3mm pitch DF33 retainer clips for use with the DF33 crimp connector housings. These 3.3mm pitch DF33 retainer clips secure the contacts firmly within the connector housing and prevent contact back-out when extreme pull out forces are applied to the ...
A range of Strain Relief Bars for use ...
Description:
A range of Strain Relief Bars for use with the MH105 Series of IDC D-sub connectors, see stock number 821-2857 typical.
Strain Relief and Cover Kits for CHAMP IDC ...
Description:
Strain Relief and Cover Kits for CHAMP IDC connectors:The System 5 Series 50 position Strain Relief Cover kits, 739-0931 and 739-0940 have a 120° cable exit Ø 8.9-17.3 mm Black and Almond in colour respectively.The 14 position Strain Relief Cover ...