RS PRO Steel Modular Shelving Cross Brace

  • RS-artikelnummer 519-504
  • Tillverkare / varumärke RS PRO
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

Rear Cross Brace

Note

A rear cladding kit will be required for each additional clad bay, and a rear cross-brace for every six open bays ordered.

Caution

The maximum safe working load per shelf is 160kg, to be uniformly distributed in both directions, maximum load per bay 1200kg.
Also: All runs of shelving require bracing. This must be in the form of a rear cross-brace assembly or a rear cladding kit and must be fitted at least one bay in six.

Modular Shelving

The RS modular shelving system has been designed as an integrated system in which each part slots together into standard modules. The shelf design incorporates a built-in box beam concept which creates inherent strength and rigidity as well as simplifying installation. A versatile system which is quick, easy and simple to erect or modify, with no nut and bolt assembly of the shelving. The uprights are perforated at 50 mm intervals to accept shelves that clip lock together with special shelf locking clips which have a wedging action when loaded, the greater the load, the stronger the structure. All major components are manufactured from steel with ’graphite’ grey uprights and light (RAL7035) grey shelves and cladding paint finish. Available in open bay or clad bay versions, height 2.1 m, width 1 m, with a selection of shelf depths and accessories.

Specifikationer
Attribute Value
System Modular Shelving
Component Type Rear Cross Brace
Load Capacity 1200kg
Material Steel
2 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
562,48 kr
(exkl. moms)
703,10 kr
(inkl. moms)
Enheter
Per unit
1 +
562,48 kr
Related Products
The Patlite circular multi-pitch bracket has a diameter ...
Description:
The Patlite circular multi-pitch bracket has a diameter of 70mm and height of 50mm. • Available in off-white colour• Mass (Tolerance ±10%) is 0.04kg • Only indoor mounting location.
This RS Slotted Cheese BZP Kit contains a ...
Description:
This RS Slotted Cheese BZP Kit contains a variety of some 2,370 machine screws, nuts and washers in a range of metric thread sizes from M3 through to M5 size.Machine screws are designed for use with threaded housing for precise ...
Modular speed bump Each element is equipped with ...
Description:
Modular speed bump Each element is equipped with 4 eye cats UV resistant Fixations for concrete or asphalt included Stand contact with hydrocarbons Recommended for temperature from +40 to -20C°.
These modular speed bump end pieces from RS ...
Description:
These modular speed bump end pieces from RS are produced from strong, UV-resistant vulcanised rubber and are supplied in a set consisting of two pieces (one yellow, one black). Modular speed hump end caps with speed bumps available separatelyMade from ...