Burkert Solenoid Valve 93970138, 2 port , NO, 230 V ac, 1.5in

  • RS-artikelnummer 816-3241
  • Tillv. art.nr 93970138
  • Tillverkare / varumärke Burkert
Lagstiftning och ursprungsland
COO (Country of Origin): DE

DS6281-EV 2/2 Solenoid Valve - Brass Bodied

A 2 way servo assisted solenoid valve suitable for use with neutral fluids such as compressed air and water. N/C (Normally Closed) and N/O (Normally Open) versions available with NBR (Nitrile Rubber) or FKM (Fluroelastomer) seals. Usable for a variety of applications including heating and refrigeration, water treatment, compressed air and vacuum systems.

0.1 - 4 second response time (dependant upon pressure)
IP65 Rated (with cable protection)
Brass body
Quiet operation
Water hammer free design
Compact installation length
NPT / Rc connection ports
0.2 - 16 Bar pressure range

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Attribute Value
Supply Voltage 230 V ac
Number of Ports 2
Operation Pilot
Connection 1-1/2 in G
Connection Size 1.5in
Default Valve Position NO
Suitable Applications Compressed Air, Water
Type 2/2
Orifice Diameter 40mm
Body Material Brass
Maximum Working Pressure 16 bar
Operating Temperature Range -10 → +80 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +80°C
Flow Factor Kv 30m³/h
Thread Standard or Connection Type G
Maximum Closing Time 0.1 → 4s
Servo Assist Yes
Connection Gender Female
Series 6281 EV Standard
1 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
2 510,64 kr
(exkl. moms)
3 138,30 kr
(inkl. moms)
Per unit
1 +
2 510,64 kr
Related Products
The valve can be mounted in any position, ...
The valve can be mounted in any position, but mounting with coil uppermost is preferred. Normally closed solenoid valves suitable for use with oil, fat without additives, water and neutral fluidsBSP parallel ports suitable for use with compression fittingsEpoxy encapsulated ...
The Type 5282 Burkert solenoid valve is specially ...
The Type 5282 Burkert solenoid valve is specially characterised by its design in which there is fluid separation by the inclusion of a diaphragm seal in the pilot valve. This enables the coil to remain protected from the effects of ...
Easy electrical installation by means of a screw ...
Easy electrical installation by means of a screw terminal coilEnclosure provided with a 1/2 NPT threaded entry hole (M20 x 1,5 in option) for a broad range of cable entriesA wide range of valves can be supplied with the operator. ...
Modular direct acting solenoid valve system. Brass body ...
Modular direct acting solenoid valve system. Brass body with polyamide coilCoil can be changed easily with valve in placeCoil can be locked in four by 90° positions or move free between, as requiredFPM high quality seal material Suitable for compressed ...