Burkert Solenoid Valve 134592, 2 port , NC, 110 V ac, 1/2in

  • RS-artikelnummer 313-2093
  • Tillv. art.nr 134592
  • Tillverkare / varumärke Burkert
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): DE
Produktdetaljer

Series 5404 Two-way High Pressure Normally Closed, Servo Assisted Solenoid Valve

Brass body with polyamide coil, PTFE seal material and stainless steel 1.4310 spring
High reliability
Unaffected by pressure surges
Easy coil change
Coil can be locked in four 90° positions, or move between as required
For use with compressed air pressure systems and gas turbines using compressed air; natural gas and water
Operating tempeature range -10 to +90°C
Protection rating IP65 with cable plug DIN43650C

//media.rs-online.com/t_line/L313208-01.gif
//media.rs-online.com/t_line/L439060-04.gif
//media.rs-online.com/t_line/L439240-02.gif
//media.rs-online.com/t_line/LE313208-01.gif
//media.rs-online.com/t_line/LI313208-01.gif

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifikationer
Attribute Value
Supply Voltage 110 V ac
Number of Ports 2
Operation Pilot
Connection 1/2 in G Female
Connection Size 1/2in
Default Valve Position NC
Suitable Applications Compressed Air, Neutral Gas, Water
Type 2/2
Orifice Diameter 12mm
Body Material Brass
Maximum Working Pressure 50 bar
Operating Temperature Range -10 → +55 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +55°C
Thread Standard or Connection Type G
Series 5404
Maximum Opening Time 400ms
Maximum Closing Time 1500ms
Flow Factor Kv 2m³/h
Connection Gender Female
Servo Assist Yes
16 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 327,91 kr
(exkl. moms)
1 659,89 kr
(inkl. moms)
Enheter
Per unit
1 +
1 327,91 kr
Related Products
The SMC VX3000 series is a direct acting, ...
Description:
The SMC VX3000 series is a direct acting, 3 port solenoid valve. Suited to various applications such as air, oil, water and steam. Valves are easily replaced without changing existing piping. DIN electrical connectionClass B & Class H coil availableCompact ...
Easy electrical installation by means of a screw ...
Description:
Easy electrical installation by means of a screw terminal coilEnclosure provided with a 1/2 NPT threaded entry hole (M20 x 1,5 in option) for a broad range of cable entriesA wide range of valves can be supplied with the operator. ...
Direct-acting, rigid PVC bodied valves for use with ...
Description:
Direct-acting, rigid PVC bodied valves for use with aggressive gases and liquids, bases and acids up to a medium concentrationSeparate diaphragm isolates the actuator from the fluidInsensitive to contaminated fluids, except sharp solid and long fibresNo differential pressure required for ...
Insensitive to contaminated fluids except for sharp, solid ...
Description:
Insensitive to contaminated fluids except for sharp, solid and long fibresBody and lid material PVC; internal parts PVDF and PVC; EPDM sealsDouble seal to valve interiorNon-metallic valve internalsLockable manual overridePressure range: 0.5 to 6 barPower consumption 20VA (Inrush ac); 11VA/5W ...