Asco Solenoid Valve SCG356A002VMS.230/50, 3 port , NC, 230 V ac, 1/8in

  • RS-artikelnummer 489-062
  • Tillv. art.nr G356A002SBA8
  • Tillverkare / varumärke Asco
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

Three-way, Zero Pressure, N/C Valves

Three-way solenoid valves with zero bar minimum operating pressure, normally closed with threaded port connection.

Brass body
Pressure not required for operation
Compact & lightweight
DIN plug connection
Ranging from -10°C to +100°C
Can be mounted in any position

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.

Specifikationer
Attribute Value
Supply Voltage 230 V ac
Number of Ports 3
Operation Direct
Connection 1/8 in G Female
Connection Size 1/8in
Default Valve Position NC
Suitable Applications Air, Inert Gas, Oil, Water
Type 3/2
Orifice Diameter 1.6mm
Body Material Brass
Maximum Working Pressure 10 bar
Operating Temperature Range -10 → +60 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +60°C
Thread Standard or Connection Type G
Maximum Closing Time 10ms
Series 356
Flow Factor Kv 0.08m³/h
Connection Gender Female
Maximum Opening Time 10ms
24 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
458,81 kr
(exkl. moms)
573,51 kr
(inkl. moms)
Enheter
Per unit
1 - 4
458,81 kr
5 +
444,82 kr
Related Products
The SMC VX3000 series is a direct acting, ...
Description:
The SMC VX3000 series is a direct acting, 3 port solenoid valve. Suited to various applications such as air, oil, water and steam. Valves are easily replaced without changing existing piping. DIN electrical connectionClass B & Class H coil availableCompact ...
The Burkert 6012P series 1/8inG female solenoid valve ...
Description:
The Burkert 6012P series 1/8inG female solenoid valve has a supply voltage of 24VDC. This 3-port NC position valve is a screwed coil system with FKM seal. It has Banjo threaded connection for direct mounting on pneumatic valves. Its maximum ...
Compact solenoid valves suitable for most gas and ...
Description:
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves ...
The Burkert 3-port 1/4in G female solenoid valve ...
Description:
The Burkert 3-port 1/4in G female solenoid valve is a vibration-proof, bolted coil system. It has high-quality seal material FKM as standard. It has a banjo-threaded connection for direct mounting on pneumatic valves. The stopper and plunger guide tube are ...