Asco Solenoid Valve E210C035SCA8, 2 port , NO, 230 V ac, 3/4in

  • RS-artikelnummer 488-289
  • Tillv. art.nr SCE210C035.230/50
  • Tillverkare / varumärke Asco
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
Produktdetaljer

Two-way, Pilot Operated, Zero Pressure, N/O Valves

Two-way pilot operated solenoid valves with zero bar minimum operating pressure, normally open with threaded port connection.

Brass body
Pressure not required for operation
Compact & lightweight
DIN plug connection
Can be mounted in any position

Note

Pressure ranges are for water and may differ for other media.

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifikationer
Attribute Value
Supply Voltage 230 V ac
Number of Ports 2
Operation Pilot
Connection 3/4 in Rp Female
Connection Size 3/4in
Default Valve Position NO
Suitable Applications Air, Inert Gas, Oil, Water
Type 2/2
Orifice Diameter 19mm
Body Material Brass
Maximum Working Pressure 9 bar
Operating Temperature Range -20 → +75 °C
Minimum Operating Temperature -20°C
Maximum Operating Temperature +75°C
Connection Gender Female
Maximum Opening Time 120ms
Thread Standard or Connection Type Rp
Flow Factor Kv 4.7m³/h
Series 210
Maximum Closing Time 120ms
2 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
2 739,69 kr
(exkl. moms)
3 424,61 kr
(inkl. moms)
Enheter
Per unit
1 +
2 739,69 kr
Related Products
The Type 5282 Burkert solenoid valve is specially ...
Description:
The Type 5282 Burkert solenoid valve is specially characterised by its design in which there is fluid separation by the inclusion of a diaphragm seal in the pilot valve. This enables the coil to remain protected from the effects of ...
Diaphragm valves for partially aggressive gaseous and liquid ...
Description:
Diaphragm valves for partially aggressive gaseous and liquid mediaSuitable for vacuumFor systems with low or fluctuating pressure conditionsDefined flow directionValve works without minimum pressure differentialElectromagnetically actuatedWith forced liftClosing dampingWithout tool, interchangeable magnet (Click-on®).
Parker 2-way solenoid valves are used in a ...
Description:
Parker 2-way solenoid valves are used in a wide variety of applications with or without pressure differential. Ideally suited for air, liquids and gases, these valves are available with a brass or stainless steel body. CompressorsWater dispensing & purificationCooling systemsMedical ...
Insensitive to contaminated fluids except for sharp, solid ...
Description:
Insensitive to contaminated fluids except for sharp, solid and long fibresBody and lid material PVC; internal parts PVDF and PVC; EPDM sealsDouble seal to valve interiorNon-metallic valve internalsLockable manual overridePressure range: 0.5 to 6 barPower consumption 20VA (Inrush ac); 11VA/5W ...