Burkert Solenoid Valve 078658, 2 port , NC, 24 V ac/dc, 3/4in

  • RS-artikelnummer 440-666
  • Tillv. art.nr 078658
  • Tillverkare / varumärke Burkert
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): DE
Produktdetaljer

Series 290 Two-way Solenoid Valves

Zero head pressure capability
Comprehensive range of port sizes
BSP parallel ports suitable for use with compression fittings
3 Pin DIN connector rated at IP65 can be positioned through 360° in 90° increments
WRC Approved (brass body only)
For use with domestic water supplies and neutral (oil-free) fluids and gasses
0 - 16 bar pressure range
Power consumption 100-120VA (Inrush AC), 25VA/12W (Hold AC/DC); 80W (Inrush), 6W (Hold)
Ambient Temperature +55°C maximum

//media.rs-online.com/t_line/L439060-04.gif
//media.rs-online.com/t_line/L439240-02.gif
//media.rs-online.com/t_line/L440622-01.gif
//media.rs-online.com/t_line/L440622-02.gif
//media.rs-online.com/t_line/LD440622-13.gif

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifikationer
Attribute Value
Supply Voltage 24 V ac/dc
Number of Ports 2
Operation Pilot
Connection 3/4 in G Female
Connection Size 3/4in
Default Valve Position NC
Suitable Applications Gas, Liquid
Type 2/2
Orifice Diameter 20mm
Body Material Brass
Maximum Working Pressure 16 bar
Operating Temperature Range Maximum of +55 °C
Maximum Operating Temperature +55°C
Flow Factor Kv 5m³/h
Thread Standard or Connection Type G
Series 0290
Servo Assist Yes
Connection Gender Female
17 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
2 396,52 kr
(exkl. moms)
2 995,65 kr
(inkl. moms)
Enheter
Per unit
1 +
2 396,52 kr
Related Products
Solenoid valves with pivoted armatures which provide high ...
Description:
Solenoid valves with pivoted armatures which provide high pressure operation with aggressive gases and fluids. BSP parallel ports compatible with RS stainless compression fittingsIP65 rated 3-pin DIN connector can be positioned through 360° in 90° incrementsZero head pressure capabilityLockable manual ...
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin ...
Description:
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° incrementsDuty cycle intermittent operation 40% 30 min8W nominal coil powerPower consumption 30VA (in-rush), 15 VA/8W (hold) a.c, A 8W d.c.Zero ...
Two-way, brass-bodied WRAS listed solenoid valves with anti-water ...
Description:
Two-way, brass-bodied WRAS listed solenoid valves with anti-water hammer devices fitted as standard. They have a zero bar minimum operating pressure and are normally closed. The compact, lightweight unit may be mounted in any position (however, for optimum life, certain ...
Two-way, direct operated, EN161 approved solenoid valves for ...
Description:
Two-way, direct operated, EN161 approved solenoid valves for use on gas pilot and gas burner control, zero bar minimum operating pressure, normally closed, threaded port connection. Pressure not required for operationCompact & lightweightISO 4400 DIN connectionClass A, group 2 service ...