Burkert Solenoid Valve 125335, 3 port , NC, 110 V ac, 1/8in

  • RS-artikelnummer 439-010
  • Tillv. art.nr 125335
  • Tillverkare / varumärke Burkert
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): DE
Produktdetaljer

6014 General Purpose Solenoid Valve

Brass bodied, normally closed solenoid valves.

Coil changed easily with valve in place
Two female ports and a 1/8 in. male vent port
Coil can be locked in four by 90° positions or move free between, as required
Brass body and FKM high quality seal material
Epoxy encapsulated coil
Fluid temperature range: -10 to +90°C
Suitable for use with water, neutral fluids air natural, gases, oil and fats (without additives)
Maximum viscosity: 21mm2/s
Operating temperature: –10 to +100°C max.
Power consumption: 21VA (a.c. in rush), 12VA/8W (constant) 8W (d.c.)
Protection to IP65 with cable plug DIN43650C

//media.rs-online.com/t_line/L439004-03.gif

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.

Specifikationer
Attribute Value
Supply Voltage 110 V ac
Number of Ports 3
Operation Direct
Connection 1/8 in G Female
Connection Size 1/8in
Default Valve Position NC
Suitable Applications Air, Gas, Neutral Liquid, Oil, Oil without Additives, Water
Type 3/2
Orifice Diameter 2mm
Body Material Brass
Maximum Working Pressure 10 bar
Operating Temperature Range -10 → +100 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +100°C
Thread Standard or Connection Type G
Series 6014
Connection Gender Female
Flow Factor Kv 0.11m³/h
5 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
581,99 kr
(exkl. moms)
727,49 kr
(inkl. moms)
Enheter
Per unit
1 - 4
581,99 kr
5 +
564,14 kr
Relaterte Produkter
The SMC VX3000 series is a direct acting, ...
Description:
The SMC VX3000 series is a direct acting, 3 port solenoid valve. Suited to various applications such as air, oil, water and steam. Valves are easily replaced without changing existing piping. DIN electrical connectionClass B & Class H coil availableCompact ...
These valves are two-way, direct operated solenoid valves ...
Description:
These valves are two-way, direct operated solenoid valves for liquid CO2. Suitable for high pressure applications and have zero bar minimum operating pressure, are normally closed with a threaded port connection. Brass body Pressure not required for operation Compact & ...
Two-way, direct acting solenoid valves, normally closed with ...
Description:
Two-way, direct acting solenoid valves, normally closed with threaded port connection. Brass bodyPressure not required for operationCompact & lightweightDIN plug connectionRanging from -10°C to +100°C Can be mounted in any position.
Three-way solenoid valves with zero bar minimum operating ...
Description:
Three-way solenoid valves with zero bar minimum operating pressure, normally closed with threaded port connection. Brass bodyPressure not required for operationCompact & lightweightDIN plug connection Ranging from -10°C to +100°CCan be mounted in any position.