Ersa HR100A Soldering Station, 230V

  • RS-artikelnummer 394-071
  • Tillv. art.nr IRHR100A-HP
  • Tillverkare / varumärke Ersa
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): DE
Produktdetaljer

Hybrid Rework System HR100A

The new HR 100 uses ERSA's revolutionary and patented Hybrid Rework Technology for safe removal and replacement of small SMDs in a lead-free environment. Safe, medium wave IR- radiation combined with a gentle hot air stream provides optimal energy transfer to the component.

This Hybrid soldering station delivers smooth and equal heat to lead-free components sizing from 0201s to 20 x 20 mm SMD and even larger. Heating power of 200 W provides a safe connection to components as well as protecting nearby areas from blowing away adjacent chips.

Who is ERSA Soldering for?

ERSA Soldering guarantees user friendly operation even for first timers. It allows you to handle the HR 100 safely and quickly. By using the HR/IRHP 100 air volume and heating power levels can be set, it will also allow you to run and record profiles.

What is on the handle?

ERSA's ergonomically designed handle contains a positioning laser which helps the operator to balance heat accurately throughout the whole process.

What are the benefits of ERSA Soldering station?

The HR 100 has been designed to be used with the IRHP 100, an 800 W IR- heating plate. This complete set provides a powerful and safe IR bottom side heating, as well as a Z-axis tool, stand for the Hybrid Tool and X-Y PCB board holder. The K- Type thermocouple included monitors PCB temperature and even allows for a closed loop soldering process with ramp profiles.

Features for HR 100 module:

• Hybrid Tool with 200 W heating element, positioning laser in the Hybrid Tool handle
• Three exchangeable Hybrid Adoptors ( 6 x 6 mm, 10 x 10 mm and 20 x 20 mm )
• Low noise Rework Blower (below 40db)
• Integrated vacuum pump and VacPen
• Tool holder and K-Typ TC input socket
• USB interface
• LED-display
• Turn and Push control

Base station HR100A

• Temperature range: 30 to 550°C
• Vacuum: -0.2 to -0.4 bar
• Heating output: 200 W

Heating plate IRHP100A

• Voltage: 220 - 240 VAC
• Heating output: 800 W
• Dimensions: 53.5 x 200 x 260 mm

This HR/IDHP 100 fulfils all needs of a modern Rework System providing flexibility at the lowest cost.

Note

Please be aware solder wire is not included with this Soldering Station. Why not try RS brand Solder wire? 756-8884

Rework - ERSA

Specifikationer
Attribute Value
Model Number HR100A
Tasks Supported Desoldering / Hot Air / Soldering / Vacuum
Plug Type Type F - Schuko plug
Wattage 800W
Input Voltage 230V
Soldering Tip Temperature +550°C
Number of Outputs 1
Display Type LED
ESD Safe Yes
Denna produkt har utgått
Related Products
High performance active tip RT Ultra for heavy ...
Description:
High performance active tip RT Ultra for heavy duty applications and largest components. Patented Thermal Core Technology: Optimized thermal heat transfer to the solder joint. Consistent soldering for reduced reworkReduces risk of damage to sensitive components and workpieces. No rework, ...
The WR 3000M repair station is tailored to ...
Description:
The WR 3000M repair station is tailored to meet the electrician's soldering requirements.3 independent channels.Automatic tool recognition.Precise control of tip temperature for optimum performance.Temperature display on LCD screen.USB port and parameter setting software includedCan be used with a wide range ...
Three-channel repair station with tool detection for the ...
Description:
Three-channel repair station with tool detection for the simultaneous operation of three soldering toolsDigital control electronics with high temperature accuracyLarge, high-contrast LC displayWith mini-USB port for updating the PC softwareSuitable for use with all high-speed micro tools, such as WMRP ...
A microprocessor controlled 160 W soldering station with ...
Description:
A microprocessor controlled 160 W soldering station with a miniature precision WMRP micro pencil and WD1M power unit designed for applications needing a combination of high thermal energy and precision. Large LCD displayThree fixed operating temperatures assigned with temperature buttonsTemperature ...