GP1A173LCS3F Sharp, Snap-In Slotted Optical Switch, Photointerrupter Output

  • RS-artikelnummer 146-0775
  • Tillv. art.nr GP1A173LCS3F
  • Tillverkare / varumärke Sharp
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

GP1A173LCS3F is a standard, low voltage operation, OPIC output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For this family of devices, the emitter and detector are inserted in a case, and a 3-pin connector is included to allow remote-mount or off-board designs.

Transmissive with OPIC output
Highlights Special position hooks, compatible with 3 different
Plate thicknesses (1.0, 1.2, 1.6mm), Snap insertion
Key Parameters Low operating voltage : 2.7 to 5.5V, Gap Width 5mm, Slit Width (detector side) 0.5mm, Package : 17 ´ 12.8 ´ 8mm (without connector and hooks), Connector : Tyco Electronics JAPAN G.K. (173977-3 and 179228-3)
RoHS directive compliant

Specifikationer
Attribute Value
Output Device Photointerrupter
Number of Channels 1
Typical Rise Time 166 (Minimum)µs
Typical Fall Time 166 (Minimum)µs
Mounting Type Snap-In
Number of Pins 5
Dimensions 27.1 x 9.8 x 16.2mm
Height 16.2mm
Length 27.1mm
Maximum Operating Temperature -30°C
Minimum Operating Temperature +95°C
Slot Width 4.3mm
Width 9.8mm
Operating Temperature Range -30 → +95°C
Output Signal Type Analogue
Series GP1A173L
150 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Pack of 10)
7,559 kr
(exkl. moms)
9,449 kr
(inkl. moms)
Enheter
Per unit
Per Pack*
10 - 40
7,559 kr
75,59 kr
50 - 90
6,607 kr
66,07 kr
100 - 240
5,987 kr
59,87 kr
250 - 490
5,356 kr
53,56 kr
500 +
4,725 kr
47,25 kr
Related Products
The OLS5 optical liquid level sensor designed for ...
Description:
The OLS5 optical liquid level sensor designed for single point liquid measurement. Transistor output in this model means that the user can configure this to meet individual requirements. Internal mounting using M10 threadMaximum pressure 20bar.
The MOC302_ Series are Optically Coupled Isolators Consisting ...
Description:
The MOC302_ Series are Optically Coupled Isolators Consisting of a Gallium Arsenide Infrared Emitting Diode Coupled With a Light Activated Silicon Bilateral Switch Performing the Functions of a Triac Mounted in a Standard 6 Pin Dual-in-Line Package. High Isolation Voltage ...
The Avago Technologies optically isolated gate drive devices ...
Description:
The Avago Technologies optically isolated gate drive devices are optimised for driving IGBT and Power MOSFET transistors. The optocouplers exhibit rail-to-rail output, fast gate switching speed, high Common Mode Rejection (CMR) and reinforced insulation. Avago Technologies R2Coupler™ isolation products provide ...
The Avago Technologies optically isolated gate drive devices ...
Description:
The Avago Technologies optically isolated gate drive devices are optimised for driving IGBT and Power MOSFET transistors. The optocouplers exhibit rail-to-rail output, fast gate switching speed, high Common Mode Rejection (CMR) and reinforced insulation. Avago Technologies R2Coupler™ isolation products provide ...