FUSS-EMV 3AFSAP400 Series 3 x 500 V ac 2.5A Line Reactor

  • RS-artikelnummer 866-1791
  • Tillv. art.nr 3AFSAP400-2,5.060
  • Tillverkare / varumärke FUSS-EMV
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): DE
Produktdetaljer

3–Phase All Pole Sinusoidal Filter, 3AFSAP400 Series

All pole sine filters achieve excellent EMC properties, since both conducted and radiated disturbances are minimised. The usage is recommended for filtering the drives of for example elevators, fans, pumps and compressors, which are located in sensitive environments. This includes medical facilities, measuring laboratories, IT or residential areas.
Another field of application is found in spatially extended drive systems such as tunnels, wind power plants, mines where often long screened cable must be installed. Therefore the use of an all-pole sine filter eliminates the cost and complexity of installing screened cables.

Features & Benefits:

Unshielded cables of any length can be used, ideally ≥100m
Unshielded drive system respecting EN61800-3
No bearing current
Noise reduction up to 10dB

Caution

The switching frequency of the inverter has to be fixed at 6 kHz

Specifikationer
Attribute Value
Maximum Voltage Rating 3 x 500 V ac
Series 3AFSAP400
Maximum Current Rating 2.5A
Dimensions 193 x 118 x 268mm
Depth 118mm
Height 268mm
Length 193mm
Maximum Operating Temperature +40 (without power derating) °C, +60 (with power derating) °C
Minimum Operating Temperature -20 (without power derating) °C, +40 (with power derating) °C
I lager för leverans inom 2 arbetsdagar
Pris (ex. moms) Each
6 362,82 kr
(exkl. moms)
7 953,52 kr
(inkl. moms)
Enheter
Per unit
1 - 9
6 362,82 kr
10 - 19
5 726,60 kr
20 - 24
5 153,87 kr
25 - 49
4 638,52 kr
50 +
4 174,05 kr
Nästa dag-leverans inte möjlig
Related Products
The Common Mode Filter in Combination with the ...
Description:
The Common Mode Filter in Combination with the Sine Filter 3AFS400 (Differential Mode) results in an All-Pole Sine-Filter. The filter allows frequencies up to 1000 Hz and filters the switching and higher frequencies. All models are highly reliable and excellent ...
The 3AFS400 Series of filters improves drive systems ...
Description:
The 3AFS400 Series of filters improves drive systems by increasing the applicable motor cable length and reduces motor noise. These filters can also protect and increase engine lifetime.
FUSS du/dt-Filters are used to reduce the voltage ...
Description:
FUSS du/dt-Filters are used to reduce the voltage slew rate at the output of frequency converters to values below 500 V/μs. du/dt-filters are simple and cheap devices to optimise in a simple drive system. du/dt filters are damping the rate ...
Schaffner FN5040 / FN5045 series output filters eliminate ...
Description:
Schaffner FN5040 / FN5045 series output filters eliminate premature motor damage caused by high DV/DT, overvoltages, cable ringing, motor overheating and eddy current losses. The output filter converts regular PWM output voltage of motor drives into a smooth sine wave ...