Solartron Metrology Voltage to Analogue Signal Conditioner, Voltage

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): GB
Produktdetaljer

OD Series BICM In Line Signal Conditioning Unit

The OD series of conditioning units are used to interface with Solartron’s sensors to provide different functionality suiting different applications. The BICM in line conditioning unit is recommended for use in harsh environments plus DC operation is achievable by using the BICM in line conditioning unit. The BICM is a simple low cost unit and can be connected up to 10 metres from the sensor and is perfect when the transducer is set up as it is unlikely to need any adjustment. An IP67 variant of the BICM is also available.

Power Requirement
Input Voltage ±15 VDC 24 VDC
Input Current (mA) ±12 24

Sensor Excitation
Primary voltage (Vms) 1.2 – 21
Primary frequency (kHz) 5

Signal Input
Input Range Up to 3.5
Input Load kΩ - 100

Storage Temperature - -20 to +80
Operating Temperature - 0 to +60
Mounting In Line

Sensor Connections - Solder tag or factory fit for IP67
Material - Plastic or Stainless Steel IP67

IP rating IP40/67 IP40

BICM - Boxed In Line Module

Approvals

IP rating IP40/67 IP40

Tillfälligt slut i lager – restorder för leverans 2020-04-01
Pris (ex. moms) Each
2 161,50 kr
(exkl. moms)
2 701,88 kr
(inkl. moms)
Enheter
Per unit
1 +
2 161,50 kr
Related Products
MurrElektronik MTW 12.4 series temperature monitoring relays are ...
Description:
MurrElektronik MTW 12.4 series temperature monitoring relays are designed specially for monitoring abnormal temperatures to prevent excessive temperature increase and to protect equipment. The temperature converter works in conjunction with a PT100 temperature sensor and convert the temperature into a ...
Switches on if over/under limits or if device ...
Description:
Switches on if over/under limits or if device is idleAdjustable thresholds: 0.1 Hz → 25 kHzDC Version: IFMR0036 (9 → 32 VDC)AC Version: IFMR0066 (85 → 250 VAC)All sensors are adjustable via DIP switchStatus display via 2 Info LEDsEasy assembly ...
Various additional functions can be realised effortlessly with ...
Description:
Various additional functions can be realised effortlessly with the signal adapters.Output signals or counting and timer functions can be changed without additional installations.The signal adapter is plugged in easily between the standardised M12 ports of the sensor and connection lead.It ...
Millenium 2 Plus has been designed to automate ...
Description:
Millenium 2 Plus has been designed to automate building and smaller machine applications. Many pre-programmed standard functions are available for counting, timing, comparison, multiplexing, time based programming, etc.,Non-expandable, expandable, and application specific starter kits are also available. All ...