Jumo TYA-201, Voltage to Current Signal Conditioner, Voltage 230 V ac Input

  • RS-artikelnummer 793-4045
  • Tillv. art.nr 709061/8-01-050-001-230-00/252
  • Tillverkare / varumärke Jumo
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): DE
Produktdetaljer

TYA-201 1-Phase Power Controller

The micro-processor controlled single-phase power controller Jumo TYA 201 displays all parameters in a backlighted LCD display and is operated using the 4 keys on the front.
SCR power controllers are employed where larger resistive and inductive loads have to be switched, e.g. in industrial kiln construction and in plastics processing. The SCR power controller comprises two SCRs connected in anti-parallel, the insulated cooling body and the control electronics.
The operating modes are phase-angle, burst-firing mode, half-wave control, SSR logical operation , fast logical operation, alpha start and soft start.
Available subordinate controls are U, U2, I, I2 and P control.
Use of a subordinate control ensures that fluctuations in the supply voltage do not affect the control loop during the control process.

Single-phase SCR power controller
Simple configuration of the device through plain text display
Setup program for configuration via USB interface
Transmission of the setup data is possible even without voltage supply to the device (USB port supplies power)
Network load optimization through dual energy management
Generalized phase mode, burst-firing mode, and half-wave control
Soft start function
Current limiting
Resistance monitoring and limitation for MoSi2 heating elements
Teach-in function for the detection of partial load failure
Integrated diagnostic systems (e.g. rotating field detection)

Specifikationer
Attribute Value
Input Range 230 V ac
Output Range 0 → 10 V, 0 → 20 mA, 0 → 5 V, 1 → 5 V, 2 → 10 V, 4 → 20 mA
Supply Voltage 230 V
Mounting Type DIN Rail
Minimum Operating Temperature 0°C
Maximum Operating Temperature +45°C
Termination Screw
Operating Temperature Range 0 → +45 °C
Series TYA-201
I lager för leverans inom 2 arbetsdagar
Pris (ex. moms) Each
6 639,42 kr
(exkl. moms)
8 299,28 kr
(inkl. moms)
Enheter
Per unit
1 +
6 639,42 kr
Nästa dag-leverans inte möjlig
Related Products
From Sollatek, the Voltright SVS range of voltage ...
Description:
From Sollatek, the Voltright SVS range of voltage stabilisers protects electrical equipment by monitoring the mains voltage and stabilising any rises or drops, ensuring a constant voltage and suppressing any surges or spikes. The SVS series accommodates voltage fluctuations across ...
5106A HART transparent repeater processes current signals of ...
Description:
5106A HART transparent repeater processes current signals of 4…20 mA and is based on microprocessor technology for gain and offset. The analogue signal is transmitted at a response time of less than 25 ms. 1 (136-8689) or 2 (136-8690) channel ...
RS Pro isolating signal converters for converting a ...
Description:
RS Pro isolating signal converters for converting a range of process signals into standard active and passive transmission current or voltage signals. AC supply voltageFully isolated – Input/Supply/OutputSignals conditioned before being fed through opto-isolating circuitRed LED power ON indicator.
Can be mounted on DIN rail individually or ...
Description:
Can be mounted on DIN rail individually or with other units. The housings are 102.5mm high by 6.2mm wide. The performance specifications are similar to standard sized MCR products. Input, 2 x 24 VDC supplyIntegrated diode decoupling of power suppliesOutput, ...