SICK Inkrementell givare DBS60 Core, Inkrementell, 9000 rpm, 1000 ppr 30V HTL, TTL Ihålig 15.87 mm

Se kategorien

Antal (1 enhet)*

2 757,02 kr

(exkl. moms)

3 446,28 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • Dessutom levereras 1 enhet(er) från den 11 maj 2026
  • Dessutom levereras 1 enhet(er) från den 11 maj 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 +2 757,02 kr

*vägledande pris

RS-artikelnummer:
212-5639
Tillv. art.nr:
DBS60E-TJFK01000 / 1077529
Tillverkare / varumärke:
SICK
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Varumärke

SICK

Kodarteknik

Inkrementell

Produkttyp

Inkrementell givare

Serie

DBS60 Core

Pulser per varv

1000ppr

Maximalt varvtal

9000rpm

Utgångssignaltyp

HTL, TTL

Axeltyp

Ihålig

Axeldiameter

15.87mm

IP-klassning

IP65

Terminaltyp

Kabel

Maximal matningsspänning

30V

Minsta arbetsstemperatur

-30°C

Totalt djup

41.8mm

Total höjd

58mm

Total bredd

58mm

Standarder/godkännanden

According to EN 61000-6-2 and EN 61000-6-3

Maximal arbetstemperatur

100°C

Typ av fäste

Hålaxelfäste

COO (ursprungsland):
MY

Overview


At a glance


Face mount and servo flange with various hole patterns

Hollow shafts up to 5/8 inches in diameter, optionally insulated; front and rear clamping

Housing diameter 58 mm, compact installation depth

Number of lines up to 10,000 pulses

Cable connection, M12 and M23 male connector, radial

TTL/HTL and TTL interfaces with voltage range 4.5 V DC ... 30 V DC

Your Benefit


Diverse installation options thanks to different flange and shaft versions as well as flange and stator couplings with different assembly hole patterns

Hollow shaft clamp on the rear housing facilitates mounting

Various connection types enable flexible cabling

Compact housing dimensions save valuable space

The encoder is protected from high shaft temperatures and currents due to the insulated hollow shaft

Rugged design with large bearing distance allows high shaft loads and a longer service life

Only a few product variants due to electrical interfaces with a large voltage range, which reduces storage costs

The DBS60 Core is a rugged incremental encoder with a diameter of 58 mm and a compact mounting depth. The portfolio includes solid shaft models with face mount flange and servo flange as well as hollow shaft designs (blind/through hollow shaft) for shafts up to a size of 5/8 inches (15.875 mm). The hollow shafts are available with shaft insulation and with a clamp on the rear housing on request. In addition to the standard interfaces for TTL and HTL, the DBS60 Core also offers two universal interfaces with a large voltage range which unites the 5 V TTL and 24 V HTL as well as 5 V TTL and 24 V TTL in one version. Due to its high enclosure rating, rugged design and a resolution of up to 10,000 pulses, the DBS60 Core is the ideal product for standard use in various industries.

Applications


Measuring of position, speed and distance in applications with low to medium requirements on the encoder.

Developed for applications in factory and logistics automation, e.g. in

Asynchronous motors

Elevators

Packaging machines

Warehousing and transport logistics

Measuring the conveying speed of a roller conveyor

Speed measurement on the slat conveyor

Precise height monitoring of printed circuit board devices

Position determination and monitoring on transfer systems

Jerk-free acceleration and deceleration of elevator cars

Speed measurement on the elevator engine

Speed and position monitoring of elevator cars with encoders

Speed monitoring in escalators with incremental encoder

Width and diameter control of coils during winding

Relaterade länkar