Parallax Inc 32213, X-Band Motion Sensor Module

  • RS-artikelnummer 781-3074
  • Tillv. art.nr 32213
  • Tillverkare / varumärke Parallax Inc
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

X-Band motion detector module

The X-Band Motion Detector operates in the X-band frequency of 10.525GHz and indicates detected movements with oscillations in its high/low output.
The X-Band Motion Detector's sensor is a common ingredient in security systems and automatic door openers, and can detect movements in a room, yard, or even on the other side of a wall. Sensitivity is manually adjustable with a potentiometer, offering direct line of sight detection from roughly 2.4 to 9m.

Operating frequency: 10.525GHz
Less prone to false triggers than passive infrared (PIR) motion sensors
Active-high enable pin with internal pull-up resistor
Trim potentiometer for manually adjustable sensitivity
4-Pin SIP header for breadboard or through-hole prototyping
Built-in series resistor for compatibility with the Propeller microcontroller and other 3.3V devices
Plated test point hole for monitoring pre-comparator signal
Power supply requirement: regulated 5Vdc @ 8mA
Communication: High (3.9V) / low (0V) signal oscillates with motion
Dimensions: 46 x 45 x 19mm
Operating temperature range: 0 to +55°C

Parallax offer an extensive range of sensor, communication and interface modules for the experimenter working on robotic systems. Most are supplied with extensive documentation making them ideal for use in education. Further information and tutorials are available from the Parallax website: http://learn.parallax.com/

Specifikationer
Attribute Value
Sensor Technology Motion Sensor
Kit Classification Module
Kit Name X-Band
23 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
348,87 kr
(exkl. moms)
436,09 kr
(inkl. moms)
Enheter
Per unit
1 - 4
348,87 kr
5 - 9
331,50 kr
10 +
319,40 kr
Related Products
The easy Radio Intelligent Controller (eRIC4) radio transceiver ...
Description:
The easy Radio Intelligent Controller (eRIC4) radio transceiver module is based on a Texas Instruments CC430 System-on-Chip (SoC) device. THe processor Flash memory is programmed with a protected version of easyRadio Operating System (eROS) which provides the user with high-level ...
The MCP2200 Breakout Module allows for the evaluation ...
Description:
The MCP2200 Breakout Module allows for the evaluation and development of the MCP2200 serial converter. Dual In-Line Package (DIP) Form Factor BoardUART Tx and Rx signalsUART RTS and CTS signals8 General Purpose (GP) linesUser selectable power supply of 3.3 V ...
The Trenz electronic is an FPGA module integrating ...
Description:
The Trenz electronic is an FPGA module integrating a Xilinx Artix-7 100T FPGA, 32Mb Quad SPI flash memory for configuration and operation. It has powerful switch-mode power supplies for all on-board voltages. The rugged high-speed stacking strips provide a large ...
HRLV-EZ Series Maxbotix Ultrasonic Rangefinders are high performance ...
Description:
HRLV-EZ Series Maxbotix Ultrasonic Rangefinders are high performance sensors with high resolution, excellent noise rejection, automatic calibration and factory set beam patterns. These small, lightweight sensor modules have three outputs: analogue voltage, digital PWM, and RS232 or TTL serial data. ...