- RS-artikelnummer:
- 143-8869
- Tillv. art.nr:
- STEVAL-STLCS01V1
- Tillverkare / varumärke:
- STMicroelectronics
5 I lager för avsändande samma dag
Lagt till varukorgen
Pris (ex. moms) Varje
387,48 kr
(exkl. moms)
484,35 kr
(inkl. moms)
Enheter | Per unit |
1 - 4 | 387,48 kr |
5 - 9 | 377,28 kr |
10 - 24 | 367,63 kr |
25 + | 358,43 kr |
- RS-artikelnummer:
- 143-8869
- Tillv. art.nr:
- STEVAL-STLCS01V1
- Tillverkare / varumärke:
- STMicroelectronics
Lagstiftning och ursprungsland
Produktdetaljer
STEVAL-STLCS0xV1 SensorTile Wireless Sensor Board
The STEVAL-STLCS0xV1 SensorTile integrates movement sensing, barometric pressure sensing, an electronic compass, a MEMS microphone, STM32 MCU and a BlueNRG BLE network processor on a tiny PCB. It supports development of monitoring/tracking applications such as IoT standalone sensor nodes linked to iOS™ or Android™ smartphones.
Module Features
80MHz STM32L476JG Cortex M4F low-power MCU with 1MB Flash memory, 128KB RAM
LSM6DSM iNEMO inertial module: 3D accelerometer and 3D gyroscope
LSM303AGR eCompass module: 3D accelerometer and 3D magnetometer
LPS22HB MEMS digital barometer: 260 to 1260hPa absolute pressure
MP34DT04 MEMS digital microphone with 64dB SNR
BlueNRG-MS Bluetooth 4.1 network processor
BALF-NRG-01D3 50Ω balun with integrated harmonic filter
Chip antenna
LD39115J18R +1.8V @ 150mA LDO regulator
SWD interface for firmware debugging/programming
External interfaces: UART, SPI, SAI, I²C, DFSDM, USB OTG, ADC, GPIO
Available with plug-in and/or solder host board connection
Power supply: +2.0 to +5.5Vdc
Dimensions: 13.5 x 13.5mm
LSM6DSM iNEMO inertial module: 3D accelerometer and 3D gyroscope
LSM303AGR eCompass module: 3D accelerometer and 3D magnetometer
LPS22HB MEMS digital barometer: 260 to 1260hPa absolute pressure
MP34DT04 MEMS digital microphone with 64dB SNR
BlueNRG-MS Bluetooth 4.1 network processor
BALF-NRG-01D3 50Ω balun with integrated harmonic filter
Chip antenna
LD39115J18R +1.8V @ 150mA LDO regulator
SWD interface for firmware debugging/programming
External interfaces: UART, SPI, SAI, I²C, DFSDM, USB OTG, ADC, GPIO
Available with plug-in and/or solder host board connection
Power supply: +2.0 to +5.5Vdc
Dimensions: 13.5 x 13.5mm
RS Product Codes
125-3924 STEVAL-STLKT01V1 SensorTile Evaluation Kit
Note
The module can be built into a production device, but will require screening and testing to prove compliance with regional RF emissions regulations.
Sensor Solution Evaluation Boards, STMicroelectronics
Specifikationer
Attribute | Value |
---|---|
Sensor Technology | Motion Sensor |
Kit Classification | Data Capture Card |
Kit Name | SensorTile |