TE Connectivity DPP101Z000, MS5637 Barometric Pressure Sensor, Temperature & Humidity Sensor Add On Board

  • RS-artikelnummer 146-8214
  • Tillv. art.nr DPP101Z000
  • Tillverkare / varumärke TE Connectivity
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): CN
Produktdetaljer

The MS5637 peripheral module provides the necessary hardware to interface the MS5637 digital barometric pressure and temperature sensor to any system that utilizes Pmod compatible expansion ports configurable for I2C communication. The MS5637 sensor is a self-contained pressure and temperature sensor that is fully calibrated during manufacture. The sensor can operate from 1.5V to 3.6V. The sensor module includes a high-linearity pressure sensor and an ultra-low power 24 bit _Σ ADC with internal factory-calibrated coefficients.

Measures pressure from 300mbar to 1200mbar
Measures temperature from -40°C to 125°C
I²C communication
Fully calibrated
Fast response time
Very low power consumption
4-pin Grove compatible connector
I²C interface
Parameters stored on chip
300 to 1200mbar pressure range
-40°C to 85°C temperature range
Very low power consumption
Operates 5V
Altitude resolution at sea level is 20 cm of air
Fast conversion time 0.5ms typical

Specifikationer
Attribute Value
Sensor Technology Barometric Pressure Sensor, Temperature & Humidity Sensor
For Use With Digilent Pmod
Kit Classification Add On Board
Kit Name MS5637
Tillfälligt slut i lager – restorder för leverans 2020-05-27
Pris (ex. moms) Each
120,05 kr
(exkl. moms)
150,06 kr
(inkl. moms)
Enheter
Per unit
1 - 1
120,05 kr
2 - 4
114,05 kr
5 - 9
108,36 kr
10 +
102,99 kr
Related Products
This pHAT provides a super affordable high-quality DAC ...
Description:
This pHAT provides a super affordable high-quality DAC for your Raspberry Pi. It pumps out 24-bits at 192KHz from the Raspberry Pi's I2S interface on its 2x20 pin GPIO header. Use pHAT DAC to build a tiny, lush-sounding streaming music ...
The 12V Protected switch shield for Arduino comes ...
Description:
The 12V Protected switch shield for Arduino comes with BTS50015-1TAD (RDS(ON) 1.5mΩ), an ultra-low ohmic smart high-side power switch from the Power PROFET™ family. Designed for relay and fuse replacement in power distribution and junction boxes, Power PROFET™ can drive ...
The STMicroelectronics EVALSTDRV600HB8 demonstration board kit is developed ...
Description:
The STMicroelectronics EVALSTDRV600HB8 demonstration board kit is developed for L638xE and L639x series high voltage compatible gate drivers and allows evaluating all of the gate driver features and functionalities while driving a half-bridge power stage based on N-channel MOSFETs or ...
The STEVAL-STLCS0xV1 SensorTile integrates movement sensing, barometric pressure ...
Description:
The STEVAL-STLCS0xV1 SensorTile integrates movement sensing, barometric pressure sensing, an electronic compass, a MEMS microphone, STM32 MCU and a BlueNRG BLE network processor on a tiny PCB. It supports development of monitoring/tracking applications such as IoT standalone sensor nodes linked ...