Figaro EM3870, Gas Sensor Evaluation Module for TGS3870

  • RS-artikelnummer 134-6634
  • Tillv. art.nr EM3870
  • Tillverkare / varumärke Figaro
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

Evaluation Module for TGS3870 Methane Gas Sensor

A PCB evaluation module from Figaro for use with the TGS3870 methane and carbon monoxide gas sensor (RS 134-6655). Testing of the sensor is simplified by using a continuous output signal generated by this module. The operating mode of TGS3870 uses a 20-second heater cycle for intermittent detection, but with this evaluation module the intermittent sensor response is converted into a continuous output voltage by the software contained in the module's microprocessor. The module requires a regulated operating supply of 5V DC.

Note

The TGS3870 Gas Sensor (RS 134-6655) is not included with the module and must be ordered separately.

PCB Mounted Gas Sensors

Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.

Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement

Specifikationer
Attribute Value
Sensor Technology Gas Sensor
For Use With TGS3870
Kit Classification Evaluation Module
11 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 683,25 kr
(exkl. moms)
2 104,06 kr
(inkl. moms)
Enheter
Per unit
1 +
1 683,25 kr
Related Products
HRLV-EZ Series Maxbotix Ultrasonic Rangefinders are high performance ...
Description:
HRLV-EZ Series Maxbotix Ultrasonic Rangefinders are high performance sensors with high resolution, excellent noise rejection, automatic calibration and factory set beam patterns. These small, lightweight sensor modules have three outputs: analogue voltage, digital PWM, and RS232 or TTL serial data. ...
The VM800P is a development module, designed to ...
Description:
The VM800P is a development module, designed to provide engineers with everything necessary to create quality Human Machine Interface (HMI) solutions with display, audio and touch functionality.This completely Arduino-compatible module features an FT800 chip for three in one operation (display, ...
The VM810C is a development module for the ...
Description:
The VM810C is a development module for the FTDI FT810 graphics engine device. It supports any LCD panel that meets the FT810 technical specification and fits the VM810C display connector. FT810 EVE2 Embedded Graphics Engine device40-way Flex-Cable connector for LCD ...
These modules are MCU to USB host controller ...
Description:
These modules are MCU to USB host controller development modules for the Vinculum VNC1L device. They are supplied on a PCB designed to fit into 24-pin or 40-pin DIP sockets and provide access to the UART, parallel FIFO and SPI ...