Hirose DX Series, Male 28 Pin Straight Cable Mount SCSI Connector 1.27mm Pitch, Jack Screw, Screw

  • RS-artikelnummer 162-5720
  • Tillv. art.nr DX-28-CV1
  • Tillverkare / varumärke Hirose
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

Hirose original 1.27mm pitch High-Density I/O connectors

1.27mm contact spacing conserves valuable board space and permits ultra-high density designs
Bellow contacts create smooth and precise mating and unmating
Unique shell design assures first make/mast break grounding and overall noise protection
IDC termination allows quick and low cost termination to AWG #28 and #30 wires
Back Shell and receptacle shell are made of diecast zinc alloy to reduce the penetration of external EMI noise
Easy to use 'One-Touch' and 'Screw' locking mechanisms assure quick and easy 'positive' closures every time
Termination method is available in IDC, Soldering, Right Angle Dip, Straight Dip and SMT
DX with 3 cavities and 2 cavities for Co-axial contacts are newly introduced to meet the needs of high speed data transmission
Shielded Plug-in type for interface between 2 Units available

Specifikationer
Attribute Value
Gender Male
Number of Contacts 28
Body Orientation Straight
Mounting Type Cable Mount
Contact Material Copper Alloy
Contact Plating Gold
Housing Material PBT
Pitch 1.27mm
Current Rating 500mA
Voltage Rating 125 V ac
Latch Type Screw
Termination Method Jack Screw
Series DX
Length 39.28mm
Minimum Operating Temperature -55°C
Width 32mm
Depth 11.5mm
Maximum Operating Temperature +85°C
I lager för leverans inom 2 arbetsdagar
Pris (ex. moms) Each
135,14 kr
(exkl. moms)
168,92 kr
(inkl. moms)
Enheter
Per unit
1 - 4
135,14 kr
5 - 9
128,42 kr
10 +
122,84 kr
Nästa dag-leverans inte möjlig
Related Products
Screwlocking assemblies for use with Harting Sub D ...
Description:
Screwlocking assemblies for use with Harting Sub D connectors. These screwlocking assemblies have a nickel or tinned finish.Male jackscrew for 9 - 37 contactsFemale jackscrew for 9 - 50 contactsStock number 873-9854 is an M3 hex extender kit consisting of ...
These 3M 122 Series Shrunk D Ribbon (SDR) ...
Description:
These 3M 122 Series Shrunk D Ribbon (SDR) Boardmount Shielded Receptacles have a low profile 0.8 mm pitch. The design of these 122 Series Shrunk D Ribbon (SDR) Boardmount Shielded Receptacles includes provision for M2 Jacksocket screws available separately, see ...
Thermoplastic backshell for use with D-subminiature connectors. These ...
Description:
Thermoplastic backshell for use with D-subminiature connectors. These backshells have a clam type shell with a 180° cable exit angle and accept a cable insulation diameter range of 3.00 to 11mm. Each d-subminiature backshell consists of the following components:2 x ...
Plastic hoods for D connectors, complete with quick ...
Description:
Plastic hoods for D connectors, complete with quick assembly strain relief grommets and full metal jack screws. Fits most types of D connectors, including IDCCable diameter 4-12mmMaterial UL 94-VØ Halogen free ABS.