Phoenix Contact SUBCON-PLUS Series 9 Way Straight Female Screw Terminal D-sub Connector

  • RS-artikelnummer 648-3495
  • Tillv. 2744694
  • Tillverkare / varumärke Phoenix Contact
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): DE

Phoenix Contact SUBCON-PLUS-CAN D-Sub Connectors

SUBCON-PLUS-CAN 9 pin D-sub socket connectors designed for use in CAN systems up to 1 MBit/s (CAN, CANopen, SafetyBus-P) allowing fast connection of incoming and outgoing bus cables under field conditions. These SUBCON-PLUS-CAN d-sub connectors have a 120 Ohm integrated terminating resistor which can be activated externally by a slide switch, segment by segment startup, a shielded ABS housing, screw connections and can all be used with bus cables as per the CiA Draft Recommendation 303-1 with an outside diameter of 8mm.
Stock numbers 801-9119, and 648-3518 have two 35° angled cable entries and an internal connection unit which can be turned around enabling cable insertion from the left or the right. Stock number 648-3518 has a second d-sub connection for connecting a programming device. These all accept a cable cross section of 7.6mm to 8.4mm.
Stock number 648-3495 has a 35° angled cable entry and can accept a variable cable diameter range of 6 to 10mm.
Stock number 648-3502 has a 180° axial cable entry and two cable entries
For suitable screwdriver see stock number 390-9663


A straight D-SUB connector from Phoenix Contact. The 9 way connector is part of the SUBCON-PLUS series and has a termination resistor that can be connected/ switched on through the slide switch. This female, D-SUB connection is suitable for wire size 18 – 26 AWG.

Features and Benefits

• Female, screw terminal
• Metal plated ABS housing
• Cable mounting type
• Operating temperature of -20°C to +75°C

BUS connectors

Rewireable bus interface connectors suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus) and Profibus systems. Compact and high quality, the 9-pole sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also available for CAN-Bus and Profibus systems, allowing online programming and repair. Each interface comes with detailed assembly instructions and mounting accessories.

Available in versions with horizontal or vertical cable outlets
Fast and reliable connection via screw terminals on the PCB
Bus terminations include SMT termination resistors
Colour-coded bodies aid installation and repair
Safe ESD protection thanks to fully insulated housings
Supplied with reliable crimp strain relief

Attribute Value
Gender Female
Number of Contacts 9
Body Orientation Straight
Housing Material Metal Plated ABS
Current Rating 100mA
Voltage Rating 50 V
Dimensions 60 x 44 x 16mm
Mounting Type Cable Mount
Depth 16mm
Minimum Operating Temperature -20°C
Width 44mm
Maximum Operating Temperature +75°C
Length 60mm
69 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
401,71 kr
(exkl. moms)
502,14 kr
(inkl. moms)
Per unit
1 - 24
401,71 kr
25 - 74
369,14 kr
75 - 199
358,07 kr
200 - 399
340,19 kr
400 +
323,13 kr
Related Products
Professional range of Phoenix Contact D-Sub connectors and ...
Professional range of Phoenix Contact D-Sub connectors and accessories from the VS series. Various accessories include mouting frames, cap nuts and protective covers. Crimp or Solder pinsVarious positions available.
A range of IP67 hoods or backshells for ...
A range of IP67 hoods or backshells for use with IP67 d-sub connectors.Part numbers 0967xxx0436 are black IP67 thermoplastic hoodsPart numbers 0967xxx0437 are black IP67 metallized thermoplastic hoodsPart numbers 0967xxx0438 are black IP67 thermoplastic hoods with 4-40 locking screwsPart numbers ...
Gesis® male and female connectors with spring or ...
Gesis® male and female connectors with spring or screw termination. Simple and quick installation time. Provided with cable clamp. Dust caps also available. Nominal voltage: 250VacCurrent rating: 16A Number of poles: 3 (L, N, ground) Materials: body: black thermoplastic Contact: ...
Phoenix brings you a series of MC PCB ...
Phoenix brings you a series of MC PCB terminal connectors. Featuring a 3.81mm pitch and a well-known name, these connectors are brilliant. They allow a wire from 0.14mm² up to 1.5mm² with a simple screw connection with a tension sleeve ...