Pilz P2HZ X3 24 V dc Safety Relay Dual Channel With 2 Safety Contacts - PNOZ X Range and 1 Auxiliary Contact

  • RS-artikelnummer 362-0174
  • Tillv. art.nr 774350
  • Tillverkare / varumärke Pilz
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): FR
Produktdetaljer

PILZ P2HZ X3 Safety Relay

The PILZ P2HZ X3 range is an affordable, durable and reliable safety relay designed with two handed control units in mind. Useful when you need to control your press controllers and safety circuits.

Features and benefits

• Specially designed for two handed control/operation. The P2HZ series will not function unless the operator has their hands outside the danger zone area during hazardous movement.
• LED indicator for switching your channel status from 1 to 2 and also to monitor your supply voltage
• Single or Dual channel input operation (Single channel are used more beneficially with smaller type machines where you need to use a dedicated logic device that only has a small function to cut off in an emergency – Dual allows you to take control of more safety circuits and control a greater amount of control zones at any given time)
• Suitable for DIN rail mounting
• Durable and has an extended service life vs. competitors
• Positive guided relay outputs (2 safety contacts, 1 auxiliary)

Safety features

• The relay will provide the circuit self-monitoring.
• The safety functions of the device remain in effect even in the case of component failures.
• The relay will prevent the circuit from further press strokes in the case of, relay failures, contact welding, coil defects or open/short circuits.

Applications

• Mechanical presses
• Hydraulic presses
• General safety circuits (in accordance with EN 60204-1)

Technical safety parameters

• EN 60204-1
• EN 954-1
• EN (IEC) 62061
• EN ISO 13849-1
• IEC 61511 – SIL 3

Standards

EN 60204-1

Specifikationer
Attribute Value
Supply Voltage 24 V dc
Number of Channels 2
Auxiliary Contacts 1
Function Two-Hand Control
Safety Contacts 2
Range PNOZ X
Reset Method Monitored
Terminal Type Screw
Depth 121mm
Length 87mm
Width 22.5mm
7 I lager för leverans inom 1 arbetsdagar
Inom 2 arbetsdag(ar) (UK lager)
Pris (ex. moms) Each
3 886,44 kr
(exkl. moms)
4 858,05 kr
(inkl. moms)
Enheter
Per unit
1 +
3 886,44 kr
Related Products
Safety relay for emergency stop, safety doors, 1- ...
Description:
Safety relay for emergency stop, safety doors, 1- or 2-channel operation, cross-circuit detection, can be retriggered, fall back/tightening delay 0.2 s to 60 s, 2 enabling current paths, US = 24 V DC, plug-in spring-cage terminal block. Low housing width ...
Line fault detection on On-button:Manual restart or automatic ...
Description:
Line fault detection on On-button:Manual restart or automatic restartWith or without cross fault monitoring2-channelForcibly guided output contactsOutput: max. 4 NO instantaneous semiconductor monitoring outputLED indicator for operation, delay contacts and failureAs option with pluggable terminal blocks for easy ...
"Safety features The safety relay meets the following ...
Description:
"Safety features The safety relay meets the following safety requirements The circuit is internally redundant with built-in self-monitoring. The safety device remains effective in the case of a component failure. The correct opening and closing of the safety device relays ...
The MSR126R/T is designed for connection to a ...
Description:
The MSR126R/T is designed for connection to a single channel safety gate, a single channel e-stop or a light curtain that provides cross fault detection. The MSR126.1R/T is designed for connection to a dual channel safety gate or e-stop, as ...