Pilz PZE 9 24 V dc Safety Relay Dual Channel With 8 Safety Contacts - PNOZ X Range and 1 Auxiliary Contact

  • RS-artikelnummer 245-1955
  • Tillv. art.nr 774150
  • Tillverkare / varumärke Pilz
Lagstiftning och ursprungsland
COO (Country of Origin): DE

PZE 9 24VDC 8n/o Safety Relay Expansion from PILZ

The PILZ PZE 9, primarily used for increasing the number of contacts you can use between your safety related control devices such as E stops, safety gates and more. The reliability Safety Relay technology from PILZ means you can control your environment with confidence that the safety status is being monitored.

Features and benefits

• Universal power supply, compatible with many different outlets of power sources
• LED indicator for switching your channel status from 1 to 2 and also to monitor your supply voltage
• Plug in terminal connections with either a spring loaded terminal or screw terminal giving you versatility in where your unit can be used.
• Feedback loop monitoring come with all base units allowing you to monitor the safety loop and identify hazards before they happen.
• Single or Dual channel input operation (Single channel are used more beneficially with smaller type machines where you need to use a dedicated logic device that only has a small function to cut off in an emergency – Dual allows you to take control of more safety circuits and control a greater amount of control zones at any given time)

Safety features

• Earth fault in the feedback loop can be detected depending on the base unit that is used
• Earth faults in the input circuit can be detected as the output will de-energise the relays and open the safety contacts.
• The device will retain its safety functions in any case of component failures ensuring your safety.
• Any safety functions in your existing circuit can be easily transferred with this expansion module with ease.
• Detection of shorts across contacts is possible with this expansion model


• Guard systems
• Emergency stop buttons
• Pull wire emergency stop switches
• Safety light curtains
• Safety sensors

Technical safety parameters

• EN 60204-1
• EN 62061
• EN ISO 13849-1
• VDE 0113-1


All base units must have a feedback control loop


60204-1; EN60947-4-1; EN60947-5-1

Attribute Value
Supply Voltage 24 V dc
Number of Channels 2
Auxiliary Contacts 1
Function Expansion Module
Safety Contacts 8
Range PNOZ X
Terminal Type Screw
Length 87mm
Width 90mm
Depth 121mm
27 I lager för leverans inom 1 arbetsdagar
Inom 2 arbetsdag(ar) (UK lager)
Pris (ex. moms) Each
2 517,44 kr
(exkl. moms)
3 146,80 kr
(inkl. moms)
Per unit
1 +
2 517,44 kr
Related Products
Each miniTwin stick contains both the sender and ...
Each miniTwin stick contains both the sender and receiver elements, each symmetrically mounted in one half of a housing and separated by a central synchronisation beam. The diagram shows two identical miniTwin units offset by 180° working as both sender ...
Safety relay for two-handed controlsDuring dangerous movements, the ...
Safety relay for two-handed controlsDuring dangerous movements, the relay requires the operator to keep both hands out of the danger zoneApplications: mechanical presses, hydraulic presses, safety control circuitsRemovable terminals with connection via spring terminalsDisplay LEDs for relay statusDIN rail ...
The safety relay ReLy OSSD2 is an evaluation ...
The safety relay ReLy OSSD2 is an evaluation unit for sensors or safety devices with OSSD outputs.The safety relay must only be used within the limits of the prescribed and specified technical data and operating conditions at all times.
"Safety features The safety relay meets the following ...
"Safety features The safety relay meets the following safety requirements The circuit is internally redundant with built-in self-monitoring. The safety device remains effective in the case of a component failure. The correct opening and closing of the safety device relays ...