ABB Jokab 24 V dc Safety Relay 5 With 4 Safety Contacts and 3NO/NC Auxilary Contact Compatible With Safety Switch 4

  • RS-artikelnummer 176-0008
  • Tillv. art.nr 2TLA010070R0000
  • Tillverkare / varumärke ABB Jokab
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): DE
Produktdetaljer

ABB Jokab Safety Contact

The ABB Jokab USR10 is a universal safety relay timer with 3NO+1NC delayable contacts and a 24VDC power supply. This is used with safety devices with contacts 1 and 2 channels, safety devices with OSSD outputs and safety edges/bumpers.

Features and Benefits

• 0-999 seconds timer functions with a better accuracy than 1%: OFF-delay, ON-delay, time bypass and time reset
• Compact in dimension 120mmx22.5mmx120mm
• Configurable and troubleshooting with display
• Custom configuration can be protected by password
• Reset function is selectable between automatic and manual
• Screw-type terminal for electrical connections

Applications

• Industrial automation
• Pressure sensitive mats
• Safety gates
• Two-hand controls

Certifications

• CE certified
• CUL listed
• PL ISO 13849-1
• TUV

Specifikationer
Attribute Value
Supply Voltage 24 V dc
Number of Channels 5
Auxiliary Contacts 3NO/NC
Function Safety Switch
Safety Contacts 4
Range Sentry
Reset Method Multi-Reset
Safety Category 4
Terminal Type Screw
Length 22.5mm
Width 120mm
Depth 120mm
Tillfälligt slut i lager – restorder för leverans 2020-08-07
Pris (ex. moms) Each
2 449,15 kr
(exkl. moms)
3 061,44 kr
(inkl. moms)
Enheter
Per unit
1 +
2 449,15 kr
Related Products
Compact, low cost unit, with LED 'tripped' indicator ...
Description:
Compact, low cost unit, with LED 'tripped' indicator and 1 change over relay contact. Reset is automatic when sensor has cooled down. Control and signalling voltages should have the same potential. Standard 22.5mm module width.
Relay module, Nominal input voltage: 24 VDC, 2 ...
Description:
Relay module, Nominal input voltage: 24 VDC, 2 changeover contacts, Limiting continuous current: 8 A, Green status indicator, Module width: 15 mm. Reinforced insulation between coil and contactsA separator plate (e.g., 209-191) must be used for voltages greater than 250 ...
Ensures motor movement is at a preset limit ...
Description:
Ensures motor movement is at a preset limit before an output signal is givenFor use with guard locking interlock switchesFault tolerant principle control unitMonitors contactor operationDimensions: H73 x W45 x D120mm.
Monitors the two-hand operation of metal working presses ...
Description:
Monitors the two-hand operation of metal working presses and other processing machines with dangerous lock movementsConforms to amended standard EN574 and therefore safety level III-C for wiring in line with the installation instructions supplied with the device (as at: 02-1997)Safety ...