Schneider Electric Dual-Channel Emergency Stop, Safety Mat/Edge, Safety Switch/Interlock Safety Relay, 230V ac, 2
- RS-artikelnummer:
- 464-495
- Tillv. art.nr:
- XPSATE3710P
- Tillverkare / varumärke:
- Schneider Electric
Denna produkt har utgått
Alternativ
Denna produkt är för närvarande inte tillgänglig. Vi rekommenderar denna produkt istället.
- RS-artikelnummer:
- 464-495
- Tillv. art.nr:
- XPSATE3710P
- Tillverkare / varumärke:
- Schneider Electric
Lagstiftning och ursprungsland
- COO (Country of Origin):
- ID
Produktdetaljer
Schneider Electric Safety Relays - XPS-ATE Range
The Schneider Electric XPS-ATE range of safety modules have been created and designed to be used for monitoring emergency stop circuits. They provide protection for both machines and operators through immediately stopping the dangerous movement on receipt of a stop instruction or if a fault is detected within the circuit.
Features & Benefits
- Conforming to standards EN/ISO 13850 and EN/IEC 60204-1 and also meet the safety requirements for the electrical monitoring of switches in protection devices conforming to standard EN 1088/ISO 14119
- Has a stop category 0, instantaneous opening safety outputs (2 for the XPS-ATE range)
- Incorporates stop category 1-time delay outputs (3 for XPS-ATE) which allows for controlled deceleration of your motor or device
- The time delay of the 3 output circuits is adjustable between 0 and 30 seconds through the use of a 12-position selector switch
- Incorporates 4 solid-state signalling outputs for signalling to the process PLC
- In the aid of diagnostics, each module from the XPS-ATE range feature LEDs which provide information on the monitoring of circuit status
- Configurable start button monitoring function, depending on the wiring
XPSATE3710P Schneider Electric Preventa Safety Relay Module.
- Preventa safety module XPSATE.
- For emergency stop and switch monitoring.
- Configurable
- Captive screw clamp terminals.
- 2 NO (volt free) instant opening, 3 NO (volt free) relay time delay opening.
- 3 solid state additional circuits.
- Rated Supply voltage 230 V ac.
- Frequency 50 to 60 Hz.
- Control circuit voltage 48 V dc.
- Maximum power consumption (VA) 3.3 VA.
- Breaking 1 A at 24 V (DC-13).
- Minimum output current 10 MA (relay output).
- Minimum output voltage 17 V (relay output).
- Response time 20 Ms (input open).
- 4 LEDs.
- Mounting 35 mm DIN rail.
- Net weight 0.38 Kg.
Protection.
- IP20 (terminals) conforming to EN/IEC 60529.
- IP40 (enclosure) conforming to EN/IEC 60529.
Safety Levels.
- Can reach PL d/category 3 time delay safety outputs conforming to EN/ISO 13849-1, Can reach PL e/category 4 instantaneous safety outputs conforming to EN/ISO 13849-1, Can reach SILCL 3 instantaneous safety outputs conforming to EN/IEC 62061, Can reach SILCL 2 time delay safety outputs conforming to EN/IEC 6206.
Standards
EN/IEC 60204-1, EN/ISO 13850, EN/IEC 60947-5-1, CSA, UL, TÜV.
Specifikationer
Attribute | Value |
|---|---|
| Supply Voltage | 230V ac |
| Number of Channels | 2 |
| Safety Contacts | 2 |
| Function | Emergency Stop, Safety Mat/Edge, Safety Switch/Interlock |
| Auxiliary Contacts | 4 |
| Reset Method | Automatic & Manual |
| Range | Preventa |
| Safety Category ISO 13849-1 | 3 |
| Terminal Type | Screw |
| Configurable | Yes |
| Depth | 114mm |
| Width | 45mm |
| Series | XPS ATE |
| Length | 99mm |