XCSA Safety Interlock Switch, Zamak, 2NC/1NO

Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): FR
Produktdetaljer

XCSA Safety Interlock Switch

3 positive opening contacts as standard (on guard opening)
A key operated lock enables positive locking of the guard
Optional version with orange LED to indicate guard open/closed
Heavy duty metal DIN style
Turret heads can be rotated through 360° in 90 steps
8 actuator entries and 1 tapped entry
20N minimum operating force for positive opening
IP67 rating
Productivity is increased due to the third contact dedicated to diagnostics
Preventa XCS Safety Switches

Note

Actuators must be purchased separately, see accessories table

Standards

Conforms to EN1088, EN60204

//media.rs-online.com/t_line/L263359-01.gif
//media.rs-online.com/t_line/LD263359-02.gif

Standards

Conforms to EN1088, EN60204.

Interlock Switch

Specifikationer
Attribute Value
Connection Type Screw
Lock Style Key
Normal State Configuration 2NC/1NO
Housing Material Zamak
Maximum AC Voltage 240V
Maximum DC Voltage 250V
Safety Contacts 2NC/1NO
Range Preventa
Number of Head Directions 8
Series XCSA
Minimum Operating Temperature -25°C
Depth 44mm
Dimensions 113.5 x 40 x 44 mm
Maximum Operating Temperature +70°C
Length 113.5mm
Width 40mm
IP Rating IP67
Maximum Current 6 A
1 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 147,74 kr
(exkl. moms)
1 434,68 kr
(inkl. moms)
Enheter
Per unit
1 - 9
1 147,74 kr
10 - 14
1 101,14 kr
15 +
1 053,42 kr
Related Products
The Bernstein AG 606 series single-pedal, momentary contact ...
Description:
The Bernstein AG 606 series single-pedal, momentary contact industrial foot switch has single normally open and single normally closed as normal state configuration. It is red and made of aluminium. This foot switch has a rated insulation voltage of 400VAC, ...
The Schmersal TESK series safety hinge switch has ...
Description:
The Schmersal TESK series safety hinge switch has 1NO/2NC state configuration. The conduit entry is M12 and number of cable entries is 1. It has a contact current rating of 2A AC and 1A DC at a voltage rating of ...
Introducing the XCS PL range of Safety Switches.As ...
Description:
Introducing the XCS PL range of Safety Switches.As far as safety is involved all dangerous machines in all sectors are involved. Such as packaging, handling, robotics, machine tools, presses and the automotive sector.Increase productivity thanks to the third contact dedicated ...
The SensaGuard Non-Contact Switch is PLe, SIL 3 ...
Description:
The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive ...