Opto, Avago, HEDL-5540#A11

  • RS-artikelnummer 178-3103
  • Tillv. art.nr HEDL-5540#A11
  • Tillverkare / varumärke Broadcom
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

Encoder Line Drivers for HEDS-55xx / 56xx / 9000 / 9100 / 9200 / 9040 / 9140 Series

Encoder Line Drivers for HEDS-55xx / 56xx / 9000 / 9100 / 9200 / 9040 / 9140 Series enhances the performance of encoders when they are used in noisy environments or when they are required to drive long distances. The encoder line drivers use an industry standard IC, AM26C31Q that provides complementary outputs for each encoder channel.

Single 5 V supply
On-board bypass capacitor

Avago Technologies Rotary Encoders

Specifikationer
Attribute Value
Pulses Per Revolution 500
Encoder Technology Incremental
Maximum Revolutions 30000rpm
Output Signal Type Push Pull
Shaft Type Hollow
Supply Voltage 4.5 → 5.5 V dc
Shaft Diameter 4mm
Resolution 500 CPR
Steps Per Revolution 500Steps
Overall Height 18.3mm
Overall Width 41.1mm
Overall Depth 30mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +100°C
Switching Frequency 100 kHz
20 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Tray of 20)
425,564 kr
(exkl. moms)
531,955 kr
(inkl. moms)
Enheter
Per unit
Per Tray*
20 +
425,564 kr
8 511,28 kr
Related Products
3315 series 9mm square sealed incremental encoder with ...
Description:
3315 series 9mm square sealed incremental encoder with a miniature package for design flexibility, a plastic conductive element, plastic shaft and bushing. This 3315 9mm incremental encoder has quadrature output, a long operating life and is bushing or PCB mounting. ...
The magnetic encoder IC range from Avago Technologies ...
Description:
The magnetic encoder IC range from Avago Technologies consists of contactless 10-bit to 16-bit programmable magnetic rotary encoders. They offer an internal voltage regulator and precise angular measurements throughout a full turn of 360°. A simple two-pole magnet is able ...
Miniature cable pull sensor with analogue outputFor length ...
Description:
Miniature cable pull sensor with analogue outputFor length or distance measurement in machine and plant constructionTried and proven, manageable solutionConverts linear movements by extending and retracting a cable into rotational motionsCompactMeasurement length up to 1000 mmRobust designSimple evaluation with ...
Cable pull sensor for length or distance measurement ...
Description:
Cable pull sensor for length or distance measurement in machine and plant construction. Temperature and ageing compensationShort-circuit proof outputsReverse polarity protection at operating voltage input1000 pulses/revolutionOutput circuit as controller with inversionMeasured length up to 2000 mmRobust ...