INA IR7X10X10.5-XL 7mm I.D Roller Bearing Inner Ring, 10mm O.D
- RS-artikelnummer:
- 194-7100
- Tillv. art.nr:
- IR7X10X10.5-XL
- Tillverkare / varumärke:
- INA
Det är tyvärr inte möjligt att visa lagerbehållning för närvarande. Uppdatera sidan och försök igen.
Nästa dag-leverans inte möjlig
Lagt till varukorgen
Pris (ex. moms) Varje
73,11 kr
(exkl. moms)
91,39 kr
(inkl. moms)
| Enheter | Per unit |
| 1 - 4 | 73,11 kr |
| 5 - 9 | 68,17 kr |
| 10 - 24 | 66,80 kr |
| 25 + | 65,22 kr |
- RS-artikelnummer:
- 194-7100
- Tillv. art.nr:
- IR7X10X10.5-XL
- Tillverkare / varumärke:
- INA
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Inner rings are used where:
The shaft cannot be used as a rolling bearing raceway for needle roller and cage assemblies, drawn cup needle roller bearings with open ends, drawn cup needle roller bearings with closed end and needle roller bearings (it cannot be hardened and ground)
Needle roller bearings must be combined with wider inner rings in order to allow larger axial displacements of the shaft in relation to the housing (e.g. in bearings with a non-locating bearing function)
Optimum running surfaces are required for seal lips
The shaft cannot be used as a rolling bearing raceway for needle roller and cage assemblies, drawn cup needle roller bearings with open ends, drawn cup needle roller bearings with closed end and needle roller bearings (it cannot be hardened and ground)
Needle roller bearings must be combined with wider inner rings in order to allow larger axial displacements of the shaft in relation to the housing (e.g. in bearings with a non-locating bearing function)
Optimum running surfaces are required for seal lips
Specifikationer
Attribute | Value |
|---|---|
| Inside Diameter | 7mm |
| Outside Diameter | 10mm |
| Race Width | 10.5mm |
| Bore Type | Parallel |
| Material | Steel |
- RS-artikelnummer:
- 194-7100
- Tillv. art.nr:
- IR7X10X10.5-XL
- Tillverkare / varumärke:
- INA