FAG 32303-A 17mm I.D Taper Roller Bearing, 47mm O.D
- RS-artikelnummer:
- 190-8380
- Tillv. art.nr:
- 32303-A
- Tillverkare / varumärke:
- FAG
Det är tyvärr inte möjligt att visa lagerbehållning för närvarande. Uppdatera sidan och försök igen.
Nästa dag-leverans inte möjlig
Lagt till varukorgen
Pris (ex. moms) Varje
315,84 kr
(exkl. moms)
394,80 kr
(inkl. moms)
| Enheter | Per unit |
| 1 - 4 | 315,84 kr |
| 5 - 9 | 297,57 kr |
| 10 - 24 | 291,11 kr |
| 25 + | 285,21 kr |
- RS-artikelnummer:
- 190-8380
- Tillv. art.nr:
- 32303-A
- Tillverkare / varumärke:
- FAG
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
High radial loads occur
High axial loads act on one side
Combined loads must be supported (radial and axial forces acting simultaneously)
Precise axial guidance of the shaft is required (locating bearing function)
The bearing arrangement must have very high axial rigidity
The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)
High running accuracy is required
The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required
The bearings are not required to compensate misalignments
The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity
High axial loads act on one side
Combined loads must be supported (radial and axial forces acting simultaneously)
Precise axial guidance of the shaft is required (locating bearing function)
The bearing arrangement must have very high axial rigidity
The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)
High running accuracy is required
The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required
The bearings are not required to compensate misalignments
The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity
Specifikationer
Attribute | Value |
|---|---|
| Inside Diameter | 17mm |
| Outside Diameter | 47mm |
| Roller Bearing Type | Taper |
| Race Width | 20.25mm |
| Bore Type | Tapered |
| Static Load Rating | 36000N |
| Cage Material | Sheet Steel |
| Number of Rows | 1 |
| Dynamic Load Rating | 36500N |
| End Type | Open |
| Fatigue Limit Load | 3850N |