Cylindrical Roller Bearing NU205-E-XL-TVP2, 25mm I.D, 52mm O.D

  • RS-artikelnummer 174-1312
  • Tillv. art.nr NU205-E-XL-TVP2
  • Tillverkare / varumärke FAG
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

FAG Cylindrical Roller Bearing NU205-E-XL-TVP2

The FAG 25mm ID, 52mm OD cylindrical roller bearing with a glass fibre reinforced polyamide cage and the removable inner ring is suitable for applications that support high radial loads and no axial loads. It has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than CN (normal) and the press fit inner and outer rings can withstand a large temperature differential. This clearance allows for thermal expansion as the bearing supports radial loads and its cylindrical rollers reduce rotational friction. This cylindrical roller bearing can support heavier loads than bearings with comparable-sized ball bearings because the cylindrical shape of the rollers provides more surface area for distributing the load and it has a larger roller set than the standard roller design. This cylindrical roller bearing can be used to a maximum operating temperature of 120°C(248°F). The inner and outer rings and cylindrical rollers are made from a low-alloy, through-hardened chromium steel for durability, heat tolerance and resistance to deformity under heavy loads. The bearing is non-locating, with two ribs on the interior circumference of the outer ring and no ribs on the exterior circumference of the inner ring. This is to allow the outer and inner rings to axially displace relative to each other from the central position. The glass fibre reinforced polyamide (PA66) cage prevents the rollers from coming into contact with each other during use to reduce friction, vibrations and noise. It weighs less and is quieter than brass cages. A removable inner ring in the open bearing allows for lubrication. This cylindrical bearing is used in a broad range of applications where high radial loads are present.

Features and Benefits

• Accommodates heavy radial loads, rapid accelerations and high-speed
• Combines the high load carrying capacity of a full complement bearing with the high-speed capability of a bearing with cage
• Low friction and allows high-speed applications
• Can be easily mounted and dismounted
• Enhanced operational reliability
• Long service life
• High stiffness

Specifikationer
Attribute Value
Inside Diameter 25mm
Outside Diameter 52mm
Roller Bearing Type Cylindrical
Race Width 15mm
Bore Type Parallel
Static Load Rating 27500N
Number of Rows 1
Dynamic Load Rating 34500N
End Type Open
Reference Speed 11600rpm
Limiting Speed 17200rpm
Fatigue Limit Load 3300N
6 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
371,79 kr
(exkl. moms)
464,74 kr
(inkl. moms)
Enheter
Per unit
1 - 4
371,79 kr
5 - 9
356,79 kr
10 - 24
349,45 kr
25 +
342,01 kr
Related Products
SKF Drawn cup needle roller bearings have a ...
Description:
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity. Generally used directly on the shaft, which ...
SKF needle roller thrust bearings can support heavy ...
Description:
SKF needle roller thrust bearings can support heavy axial loads, are insensitive to shock loads and provide stiff bearing arrangements which require a minimum of axial space. Single direction bearings and can only accommodate axial loads acting in one directionParticularly ...
FAG by Schaeffler tapered roller bearings feature a ...
Description:
FAG by Schaeffler tapered roller bearings feature a high radial and axial load carrying capacity and a large usable speed range. They are efficient at supporting forces and ensure a precise and rigid shaft guidance system due to the large ...
INA from Schaeffler drawn cup needle roller bearings ...
Description:
INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete ...