Taper Metric Roller Bearing 30mm I.D, 55mm O.D

  • RS-artikelnummer 146-9279
  • Tillv. art.nr 32006
  • Tillverkare / varumärke RS PRO
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): CN
Produktdetaljer

The series designations in accordance with
ISO 355 consist of a digit and two letters.
The digit represents the contact angle. The two letters represent the diameter and width series, respectively.
This is followed by a three-digit bore diameter d [mm].
The basic designations of SKF tapered roller bearings start with the letter T, e.g.T2ED 045.

Specifikationer
Attribute Value
Inside Diameter 30mm
Outside Diameter 55mm
Roller Bearing Type Taper
Race Width 17mm
Bore Type Tapered
Static Load Rating 44kN
Cage Material Steel
Number of Rows 1
Dynamic Load Rating 43.9kN
End Type Open
Reference Speed 10000rpm
Limiting Speed 12000rpm
Fatigue Limit Load 4.55kN
70 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
60,81 kr
(exkl. moms)
76,01 kr
(inkl. moms)
Enheter
Per unit
1 - 4
60,81 kr
5 - 9
58,34 kr
10 - 24
57,10 kr
25 +
55,88 kr
Related Products
SKF Spherical Roller Bearings offer an attractive combination ...
Description:
SKF Spherical Roller Bearings offer an attractive combination of design features, which make them irreplaceable in many demanding applications. Self-aligning - allows misalignment between shaft and housing without increase of friction and without reduction of bearing lifeVery high Load Carrying ...
Single-row taper roller bearings can only take axial ...
Description:
Single-row taper roller bearings can only take axial loads in one direction. The forces generated in the bearing by radial loads, and the force acting axially, must be offset by an external counter force. This is why in practice single-row ...
Single-row taper roller bearings can only take axial ...
Description:
Single-row taper roller bearings can only take axial loads in one direction. The forces generated in the bearing by radial loads, and the force acting axially, must be offset by an external counter force. This is why in practice single-row ...
These bearings are the most basic and most ...
Description:
These bearings are the most basic and most widely used type of tapered roller bearings. They consist of two main separable parts, the cone (inner ring) assembly and the cup (outer ring). They are typically mounted in opposing pairs on ...