INA HK16162RSL271 16mm I.D Drawn Cup Needle Roller Bearing, 22mm O.D
- RS-artikelnummer:
- 137-1745
- Tillv. art.nr:
- HK16162RSL271
- Tillverkare / varumärke:
- INA
4 I lager för avsändande samma dag
Lagt till varukorgen
Pris (ex. moms) Varje
89,49 kr
(exkl. moms)
111,86 kr
(inkl. moms)
| Enheter | Per unit |
| 1 - 4 | 89,49 kr |
| 5 - 9 | 85,88 kr |
| 10 - 24 | 84,02 kr |
| 25 + | 82,49 kr |
- RS-artikelnummer:
- 137-1745
- Tillv. art.nr:
- HK16162RSL271
- Tillverkare / varumärke:
- INA
Datablad
Lagstiftning och ursprungsland
- COO (Country of Origin):
- DE
Produktdetaljer
Drawn Cup Needle Roller Bearings
INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete unit.
Most the bearings are of a single row design and do not have a lubrication hole. Double row designs have a lubrication hole and the suffix ZW.
Features and Benefits
• Lower operating costs
• Reduced maintenance due to improved lubrication
• Lower heat generation
• Less noise
Product Application Information
These bearings allow the design of compact and easy‑to‑fit bearing arrangements with high radial load carrying capacity.
Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft.
Suffixes
2RS - Contact seals on both sides
RS - Contact seal on one side
ZW - Double row design, with lubrication hole
INA
Specifikationer
Attribute | Value |
|---|---|
| Inside Diameter | 16mm |
| Outside Diameter | 22mm |
| Roller Bearing Type | Drawn Cup Needle |
| Race Width | 16mm |
| Bore Type | Parallel |
| Material | Steel |
| Static Load Rating | 9700N |
| Cage Material | Sheet Steel |
| Number of Rows | 1 |
| Dynamic Load Rating | 7600N |
| End Type | Sealed |
| Limiting Speed | 9300rpm |
| Maximum Speed - Grease | 9300rpm |
| Fatigue Limit Load | 1160N |