Thrust Needle Roller Bearing AXK 1024, 10mm I.D, 24mm O.D

  • RS-artikelnummer 513-761
  • Tillv. art.nr AXK 1024
  • Tillverkare / varumärke SKF
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): DE
Produktdetaljer

SKF Needle Roller and Cage Assemblies Series AXK

SKF needle roller thrust bearings can support heavy axial loads, are insensitive to shock loads and provide stiff bearing arrangements which require a minimum of axial space.

Single direction bearings and can only accommodate axial loads acting in one direction
Particularly compact bearing arrangements can be made, taking up no more space than a conventional thrust washer, if the faces of adjacent machine components can serve as raceways for a needle roller and cage thrust assembly

//media.rs-online.com/t_line/L0513761-01.jpg
Specifikationer
Attribute Value
Inside Diameter 10mm
Outside Diameter 24mm
Roller Bearing Type Thrust Needle
Race Width 2mm
Bore Type Parallel
Static Load Rating 26kN
Cage Material Sheet Steel, Steel
Number of Rows 1
Dynamic Load Rating 8.5kN
Maximum Speed - Oil 4800rpm
Fatigue Limit Load 2.85kN
Maximum Speed - Grease 3600rpm
42 I lager för leverans inom 1 arbetsdagar
Inom 2 arbetsdag(ar) (UK lager)
Pris (ex. moms) Each
30,19 kr
(exkl. moms)
37,74 kr
(inkl. moms)
Enheter
Per unit
1 - 4
30,19 kr
5 - 9
29,06 kr
10 - 24
28,33 kr
25 +
27,81 kr
Related Products
SKF Drawn cup needle roller bearings have a ...
Description:
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity. Generally used directly on the shaft, which ...
INA from Schaeffler drawn cup needle roller bearings ...
Description:
INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete ...
Drawn cup needle roller bearings with open ends ...
Description:
Drawn cup needle roller bearings with open ends and with closed end are needle roller bearings with a very small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a ...
Axial needle roller bearings should preferably be guarded ...
Description:
Axial needle roller bearings should preferably be guarded on to the shaftSpace saving can be achieved if the faces of the adjacent parts are designed as raceways, so that washers can be dispensed withHardened steel cagesHigh load carrying capacityHigh rigidity/space ...