Spherical Roller Bearing 22211EK, 55mm I.D, 100mm O.D

  • RS-artikelnummer 506-454
  • Tillv. art.nr 22211EK
  • Tillverkare / varumärke SKF
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

SKF Spherical Roller Bearings

SKF Spherical Roller Bearings offer an attractive combination of design features, which make them irreplaceable in many demanding applications.

Self-aligning - allows misalignment between shaft and housing without increase of friction and without reduction of bearing life
Very high Load Carrying Capacity - Optimum layout inside available cross-section provides maximum radial and axial load carrying capacity
Robust - Insensitive to misalignment caused by shaft or housing deflection due to heavy load
Easily fitted for loads in all directions - The bearings are non-separable and ready to install using a number of mounting methods
Easy bearing application - The favourable design characteristics and mounting enable for a more efficient and compact machine design

Spherical Roller Bearings with integral seals BS2 Series offer additional benefits:

Protection against contamination - SKF sealed spherical roller bearings are especially suited for bearing positions where, because of limited space or for cost reasons, effective external seals cannot be provided
Grease Retention - Contact seals on both sides of the bearing retain the factory filled grease where it is required: inside the bearing
Minimum maintenance requirements - Under normal operating conditions, sealed spherical roller bearings are maintenance free, keeping costs and grease consumption low

Spherical Roller Bearings

Specifikationer
Attribute Value
Inside Diameter 55mm
Outside Diameter 100mm
Roller Bearing Type Spherical
Race Width 25mm
Bore Type Tapered
Material Metal
Static Load Rating 127kN
Cage Material Steel
Number of Rows 2
Dynamic Load Rating 125kN
End Type Open
Reference Speed 6300rpm
Limiting Speed 8500rpm
Fatigue Limit Load 13.7kN
4 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
905,58 kr
(exkl. moms)
1 131,98 kr
(inkl. moms)
Enheter
Per unit
1 - 4
905,58 kr
5 - 9
869,39 kr
10 - 24
851,29 kr
25 +
833,09 kr
Related Products
The main benefit of split plummer block housings ...
Description:
The main benefit of split plummer block housings is their easy installation; pre-assembled shafts can be mounted in them. SNL Plummer blocks are primarily intended for self-aligning ball bearings, spherical roller bearings and CARB bearings. Stiff Design - Insensitive to ...
FAG by Schaeffler tapered roller bearings feature a ...
Description:
FAG by Schaeffler tapered roller bearings feature a high radial and axial load carrying capacity and a large usable speed range. They are efficient at supporting forces and ensure a precise and rigid shaft guidance system due to the large ...
These bearings are the most basic and most ...
Description:
These bearings are the most basic and most widely used type of tapered roller bearings. They consist of two main separable parts, the cone (inner ring) assembly and the cup (outer ring). They are typically mounted in opposing pairs on ...
The series designations in accordance with ISO 355 ...
Description:
The series designations in accordance with ISO 355 consist of a digit and two letters. The digit represents the contact angle. The two letters represent the diameter and width series, respectively. This is followed by a three-digit bore diameter d ...