TE Connectivity, DuraSeal Insulated Ring Terminal, 5mm Stud Size, 3mm² to 6mm² Wire Size, Yellow
Lagt till varukorgen
- Tillv. art.nr:
- Tillverkare / varumärke:
- TE Connectivity
- COO (Country of Origin):
|Enheter||Per unit||Per Bag*|
|500 +||10,832 kr||5 416,00 kr|
TE Connectivity DuraSeal Ring Terminals
DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal crimp ring terminals are covered in a heat-shrinkable nylon tubing lined with a hot-melt adhesive with is cut and abrasion resistant.
Red 0.25 - 1.6 mm²
Blue 1.0 - 2.6 mm²
Yellow 2.7 - 6.6 mm²
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important
Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².
|Maximum Wire Size mm²||6mm²|
|Minimum Wire Size mm²||3mm²|
|Minimum Wire Size AWG||12AWG|
|Maximum Wire Size AWG||10AWG|