Eccel Technology Ltd RFID Reader RFID A1_B1 EB (000374), Reader

  • RS-artikelnummer 162-4454
  • Tillv. art.nr RFID A1_B1 EB (000374)
  • Tillverkare / varumärke Eccel Technology Ltd
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): GB
Produktdetaljer

The A1/B1 EB v2.0 is an Extension Board (EB) for our RFID modules: the RFID A1 and RFID B1. The user can quickly connect our RFID modules to his device and check functionality and compatibility without wasting time in antenna design and tuning. The A1/B1 EB is simply a board with a built-in PCB antenna where the user can solder our RFID modules and test them. The read range with Mifare 1k ISO card is about 50 mm. All available pins of both modules are placed on the board with descriptions. There is also LED1 (green) which indicates a tag presence in the antenna field.

Specifikationer
Attribute Value
Component Type Reader
Supported Bus Interfaces I2C, Serial, SPI, UART, USB
Supply Voltage 2.5 → 3.6V
Length 46mm
Maximum Operating Temperature +85°C
Minimum Operating Temperature -25°C
Width 34mm
7 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
32,36 kr
(exkl. moms)
40,45 kr
(inkl. moms)
Enheter
Per unit
1 +
32,36 kr
Related Products
The Grove-125KHz RFID Reader is a module used ...
Description:
The Grove-125KHz RFID Reader is a module used to read EM4100 RFID card information with two output formats: Uart and Wiegand. It has a sensitivity with maximum 7cm sensing distance. Selectable output format: Uart or Wiegand.4Pins Electronic Brick InterfaceHigh SensitivityFor ...
HITAG low-frequency RF transponder technology is designed for ...
Description:
HITAG low-frequency RF transponder technology is designed for use in harsh and industrial environments. HITAG transponder devices feature an ultra low power design, providing long read-ranges needed for livestock tracking. RF Frequency Range: 100 to 150kHzIntegrated capacitors with different values ...
The TRF7960/61 is an integrated analogue front end ...
Description:
The TRF7960/61 is an integrated analogue front end and data-framing system for a 13.56-MHz RFID reader system. Operating Frequency Range: 13.56MHzRF Output Power: +20 or +23dBmAdjustable ASK modulation rangeReceiver band-pass filter with user-selectable corner frequenciesCompletely integrated protocol handlingDual ...
Description:
The UART-B1 is a low cost full RFID/NFC read/write device with UART interface. Can operate in “host” connected mode or “stand alone” mode. Supports Mifare Classic 1k & 4k, NTAG2xx and Ultralight. Additionally, you can read serial numbers from Mifare ...